Is there any moment you found the original radio is kind of too old to totally meet your needs?
Is there any moment you are tired of the complicated operation and craving for the more convenient stereo system?
Come on, time to change and upgrade it with a brand new aftermarket car radio.
The following is a 2006 2007 2008 2009-2012 Toyota Corolla car radio installation instruction from Seicane, which enables you to have a general understanding of the new car radio. If you have the same or similar dashboard, you can refer to the following instruction.
Car Radio Player for 2006-2012 Toyota Corolla after installation
Tips about the installation:
1. Please disconnect the power before the installation.
2. Please prepare a lever and a screwdriver before the removal and the installation.
3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2006-2012 Toyota Corolla car radio installation instruction
1. Remove the trim pieces above cup holder with a lever.
Remove the trim pieces above cup holder with a lever
2. Remove 4 bolts behind the trim piece.
Remove 4 bolts behind the trim piece
3. Gently pry around the side of trim panel and then remove the upper trim panel.
Gently pry around the side of trim panel and then remove the upper trim panel
4. Gently pry around the side of bottom trim panel and take out the original radio.
Gently pry around the side of bottom trim panel and take out the original radio
5. Disconnect the smaller harness on the behind of the original car radio.
Disconnect the smaller harness on the behind of the original car radio
6. Check all the accessories for the new Seicane car radio.
Check all the accessories for the new Seicane car radio
7. Connect the harnesses to the back of the new Seicane car radio.
Connect the harnesses to the back of the new Seicane car radio
8. Connect the Seicane car radio to your original car radio’s plugs.
9. Install four screws and trim panel.
10. Install the trim piece.
11. Turn on the new radio and have a comprehensive test if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
Before installation, please make clear every detailed specific step and your car mode and related compatible replacement radio system. If you have any doubts, please don’t hesitate to consult your dealer for seeking valuable advice. If you are still searching for an ideal car radio, here I would like to share a remarkable Seicane Android 6.0 Multimedia Autoradio GPS Navigation System for 2006-2012 Toyota Corolla with you. For more details, please click:
Loaded with the advanced and stable Android 6.0 operation system and a high-quality quad-core CPU processor, this amazing car radio can bring you the excellent fluent using experience.
Built in GPS module with dual zone function, you can get to anywhere with accurate guidance easily. At the same time, Bluetooth chips built inside makes it support Bluetooth hands-free call, and Bluetooth streaming music playing from phone. Equipped with 4G,Wi-Fi, it can be connected to Wifi spot anytime .
Additionally, it also supports DVR, 1DIN DVD or OBDII as an option function.
Wish you like this unit and good luck to you!
Recent Comments