Installing a new car stereo to get the latest convenience and enjoyment has become a trend nowadays. If you are a car owner of a 2005-2011 NISSAN PALADIN and want to replace your factory radio, then you can check the image below which is a Seicane 2005-2011 NISSAN PALADIN car stereo after installation, if you also have the same dashboard, you can read carefully the following 2005-2011 NISSAN PALADIN car stereo installation guide for its installation.
2005-2011 NISSAN PALADIN car stereo after installation
Precautions:
- Please apply the parking brake before the installation.
- For your safety, please disconnect the negative cable on the vehicle battery.
- Please prepare a lever and a screwdriver for the installation.
2005-2011 NISSAN PALADIN car stereo installation guide
Step 1:
Use a screwdriver to remove two screws above the Nissan Frontier radio.
2005-2011 NISSAN PALADIN car stereo installation step 1
Step 2: Remove the trim panel.
Please wedge a flat tip screwdriver under the trim panel and pry up on it to remove the trim panel. To protect the trim from being accidentally scratched, you can use a clean rag while prying up on the trim panel.
2005-2011 NISSAN PALADIN car stereo installation step 2
Step 3: Unscrew the four screws which are holding the factory radio in place with a screwdriver. Then gently take the factory radio off the panel.
2005-2011 NISSAN PALADIN car stereo installation step 3
Step 4: Disconnect the radio antenna in the back of the factory radio and unplug the electrical plugs running to the back of the radio.
2005-2011 NISSAN PALADIN car stereo installation step 4
Step 5: Connect the antenna in the back of the new Seicane car stereo and plug the electrical plugs running to the back of the radio. If you have any question on how to connect the antenna to new car stereo, please take the user manual as a reference or turn to the dealer for a wiring diagram.
Step 6: Turn on the new Seicane car stereo to have a careful check if it works well with your car. If it doesn’t, please check whether all the cables are connected correctly.
Step 7: After the test, please put the new Seicane car stereo into the dash.
Step 8: Install all the screws and the trim panel into their original place.
Above all, if you have any questions about any step, please ask your dealer or a technician for help. Wish the guide above can be helpful for you. Please make sure you are clear about every step before you start to install. If it’s the first time for you to install a head unit, you’d better do it under the guidance of a professional or have it installed by a technician.
Besides, a suitable car stereo is necessary to ensure a successful upgrade for your car. If you haven’t gotten one yet, I’d like to recommend a great 2005-2011 NISSAN PALADIN car stereo from Seicane to you. Here’ s the link, please click:
This NISSAN PALADIN car stereo comes with the latest GPS navigation system, you can benefit from its powerful world-wide real time GPS function which can provide the current location, landmark display, 3D street view, route planning and voice prompts for you to easily find your way to your desired destination on time.
The BC6 Bluetooth module is included for you to have hands-free calls for safety and stream your favorite music from your playlist in your mobile phone. Besides, you are allowed to play all kinds of DVD disks from all countries with the region-free DVD player to keep relaxed all the way.
Just keep entertained all the way with this remarkable NISSAN PALADIN car stereo on all your trips, it’s the time now! Good luck to you!
Recent Comments