Are you eager to upgrade your factory radio with a brand new multifunctional car radio by yourself? If yes, you can try to remove your original factory radio and install a new car radio under the correct installation guide. The following is a 2016 Nissan Qashqai car radio installation guide from Seicane. If you have the same or similar dashboard, you can refer to this guide carefully.
2016 Nissan Qashqai Bluetooth GPS Car Stereo after installation
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2016 Nissan Qashqai car radio installation steps
1. Use a plastic removal tool to remove the panels near the radio.
Use a plastic removal tool to remove the panels near the radio
1-1
1-2
2. Remove the air condition climate panel.
Remove the air condition climate panel
2-1
3. Unscrew the screws holding the radio with a screwdriver.
Unscrew the screws holding the radio with a screwdriver
4. Gently take out the originalcar radio.
5. Disconnect the connectors and cables at the back of the radio.
Disconnect the connectors and cables at the back of the radio
6. Check all the accessories for the new Seicane car radio.
Check all the accessories for the new Seicane car radio
7. Connect the harnesses to the back of the new Seicane car radio.
Connect the harnesses to the back of the new Seicane car radio
8. Connect the Seicane car radio to your original stereo’s plugs.
9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
10. Put the new Seicane car radio into the dash.
11. Put everything into their original place. All the installation is done.
Wish the above installation guide can give you some help. If you come across any problems, you can seek help from your dealer, communicate with someone experienced or turn to a professional for help. Additionally, if you are afraid of making damage to either your car radio or your car, you can straightly go to a car radio upgrade center and arrange a professional technician to help you. While for the selection of an idea car radio, if you have no ideas, here I would like to share an amazing 2016 Nissan Qashqai car radio from Seicane with you. For more details, please click:
This amazing car radio can be regarded as one of the best road companion for you since it is running on the stable Android 6.0 operation system and a powerful quad-core CPU.
With the assistance of the worldwide real-time GPS navigation system, you can easily know where you are currently and find the optimal route option to get to your desired destinations under the guidance of the turn-by-turn directions and voice prompts. Besides, this unit comes with dual zone function, which allows you to listen to your favorite music while navigating, and the music will automatically switch to GPS voice.
Additionally, under the wireless Bluetooth technology, you are able to dial, answer, reject and mute Bluetooth hands-free phone calls and listen to Bluetooth streaming music from your phone playlists. Therefore, you can gain a lot of convenience and enjoyment during driving.
What are you waiting for? If you like this unit, just don’t hesitate to add this unit to your shopping cart.
Recent Comments