In the past, paper maps used to be the only way of planning route navigation even you are in a car. With the paper maps, you have to find the correct related maps which cover your destinations and then highlight the routes to take. What’s more, while driving, you need someone else to read the map which cannot promise your safe driving adequately. However, if you just install an up-to-date car radio featured with GPS navigation system, it will greatly bring you a lot of convenience and guarantee your driving safety. To help you have a general understanding of the upgrade process of a 2002 2003 2004-2008 Dodge RAM Pickup VAN radio, I’d like to introduce detailed steps to remove and install a 2002 2003 2004-2008 Dodge RAM Pickup VAN radio.
2002 2003 2004-2008 Dodge RAM Pickup VAN radio after installation
Some tips before the installation:
1.Please disconnect the power before the installation.
2.Please prepare a lever and a screwdriver before the removal and the installation.
3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2002 2003 2004-2008 Dodge RAM Pickup VAN car radio removal and installation steps
1. Loosen the trim panel with a lever.
Loosen the trim panel with a lever
2. Take the panel off the dash and disconnect the wires from the car.
Take the panel off the dash and disconnect the wires from the car
2-1
3. Remove the four screws which are holding the unit with a screwdriver.
Remove the four screws which are holding the unit with a screwdriver
4. Take out the unit and disconnect the wire harness at the back of the unit.
Take out the unit and disconnect the wire harness at the back of the unit
4-1
5. Check all the accessories for the new Seicane car radio.
Check all the accessories for the new Seicane car radio
6. Connect the Seicane car radio to your original car radio’s plugs.
Connect the Seicane car radio to your original car radio’s plugs
6-1
7. Put the new Seicane car radio into the dash.
8. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
9. Put trim panel back on your new Seicane car radio after the normal test.
If you have any doubts about the upgrade process of a 2002 2003 2004-2008 Dodge RAM Pickup VAN car radio, please further consult your dealer for valuable advice or just arrange a professional to install the radio directly.
Anyway, before the installation, please check whether your new car stereo can work well with your car or not. If not, you might refer to the following 2002 2003 2004-2008 Dodge RAM Pickup VAN car radio from Seicane . Here comes the link, please click:
Upgraded to the most advanced WinCE 6.0 operation system and a powerful Cortex A9 MStar 785 1GHz dual-core CPU, this intelligent radio can be one of your best choices to replace your factory radio in 2002 2003 2004-2008 Dodge RAM Pickup VAN.
The features of this unit mainly consist of GPS navigation function, FM/AM radio, DVD player, Bluetooth hands-free calls, Bluetooth streaming music, USB/ SD connection, etc, which can meet almost all your different needs ion car.
Take the built-in GPS navigation system as an example. When you turn on the GPS function, you can easily get access to voice cues, distance information, POIs, and road planning all the way so that you can accurate know your current location and navigate to your desired destinations.
If you like this 2002 2003 2004-2008 Dodge RAM Pickup VAN car radio, please don’t hesitate to take it home. Good luck to you!
Recent Comments