How difficult is it for you to replace your factory radio with a new aftermarket car radio? As a matter of fact, it only takes your not much time for you to finish the removal and installation process. We write this article mainly to introduce how to remove and install a 2013 2014 SUZUKI SX4 car radio. If you have the same or similar dashboard, and you also want to replace your factory radio, you can carefully refer to the following 2013 2014 SUZUKI SX4 car radio installation instruction from Seicane.
2013 2014 SUZUKI SX4 Car Stereo after installation
Some tips before the installation:
1. Please disconnect the power before the installation.
2. Please prepare a lever and a screwdriver before the removal and the installation.
3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2013 2014 SUZUKI SX4 car radio installation instruction
1. Pry the indicator light with a plastic knife and disconnect the connector at the back of it.
Pry the indicator light with a plastic knife and disconnect the connector at the back of it
2. Remove the air vent with a plastic removal tool.
Remove the air vent with a plastic removal tool
3. Remove two top screws that are holding the radio.
Remove two top screws that are holding the radio
4. Gently take out the original radio.
Gently take out the original radio
5. Disconnect the connectors and cables at the back of the radio.
Disconnect the connectors and cables at the back of the radio
6. Check all the accessories for the new Seicane car radio.
7. Connect the harnesses to the back of the new Seicane car radio.
8. Connect the Seicane car radio to your original radio’s plugs.
9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
10. Put the new Seicane car radio into the dash.
11. Put everything into their original place. All the installation is done.
Above is the whole removal and installation process for a 2013 2014 SUZUKI SX4 car radio. If you meet any problems you cannot deal with independently, you can consult your dealer, communicate with someone experienced or turn to a professional for help. Besides, it is essential for you to select an ideal car radio. If you have no ideas, you can refer to the following link which is a remarkable 2013 2014 SUZUKI SX4 car radio from Seicane.
This great car radio can be regarded as one of the best choices to replace your factory radio since it is running on the advanced and stable Android 7.1 operation system, a powerful quad-core CPU processor and 2 GB RAM, which will provide you with higher performance and high configurations to make your operation smoother and faster.
Even you are in unfamiliar place, you can easily know your current locations and navigate to your desired destinations according to turn-by-turn directions and voice prompts provided by the high-end 3D GPS navigation system of high accuracy. And this unit’s dual zone function enables you to listen your favorite music while navigating.
Besides, this unit also comes with additional entertainment features to make you relax in car.
Wish you like this unit and good luck!
Recent Comments