When it comes to pursuing a more comfortable car interior environment and a more wonderful driving experience, some car owners choose to buy a new car with higher performance and configuration which is unrealistic for most of car owners. Actually, it is adoptable for you to upgrade your factory radio which can save a lot of unnecessary budget. Here is a 2011-2015 KIA K2 RIO car stereo installation guide, if you have the same or similar dashboard, you can take it as reference.
2011-2015 KIA K2 RIO car radio after installation
Tips about the installation:
1.Please disconnect the power before the installation.
2.Please prepare a lever and a screwdriver before the removal and the installation.
3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2011-2015 KIA K2 RIO car stereo installation guide
1. The original car radio.
The original car radio
2. Use a plastic removal tool to release the top panel.
Use a plastic removal tool to release the top panel
3. Pry the trim panel of the radio with a plastic knife and remove it. Unplug the connector at the back of it.
Pry the trim panel of the radio with a plastic knife and remove it. Unplug the connector at the back of it
3-1
4. Unscrew the screws that are holding the radio on the dashboard.
Unscrew the screws that are holding the radio on the dashboard
5. Take out the radio gently.
Take out the radio gently
6. Unplug the connectors and cables at the back of the radio.
Unplug the connectors and cables at the back of the radio
7. Check all the accessories for the new Seicane car stereo.
8. Connect the harnesses to the back of the new Seicane car stereo.
9. Connect the Seicane car stereo to your original stereo’s plugs.
10. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
11. Put the new Seicane car stereo into the dash.
12. Put everything into their original place. All the installation is done.
Above are all steps to install a 2011-2015 KIA K2 RIO car stereo. Wish you can get some help. If you encounter any problems you cannot deal with, you can consult your dealer for valuable advice or arrange a professional technician to install it directly. But if you don’t have a suitable car stereo for your beloved car, you can check the following link which is about a wonderful 2011-2015 KIA K2 RIO bluetooth gps car stereo from Seicane.
This great 2011-2015 KIA K2 RIO bluetooth gps car stereo is specially designed to be your perfect road companion since it enables you to reach your desired destinations with the assistance of its built-in 3D GPS navigation system of high accuracy. Besides, this unit enables you to make, receive and reject hands-free calls as well as enjoy Bluetooth music without keeping hands off the steering wheel. Moreover, you can also take advantage of its entertainment function as a multimedia player to play CDs, DVDs, TV programs, movies, etc, to please both you and your passengers. Wish you like it and good luck to you!
Recent Comments