How to Upgrade a 2008 2009 2010 2011 2012-2013 Subaru Forester Car Stereo with Audio Sat Nav System

Would you like to drive your own car and have a very relaxing driving experience? If your answer toward this question is “yes”, then you can install a remarkable multifunctional car radio to replace your factory radio in car. The following is a 2008 2009 2010 2011 2012-2013 Subaru Forester car radio installation guide. If you have the same or similar dashboard, then please refer to the following guide carefully.

2008 2009 2010 2011 2012-2013 Subaru Forester Car Stereo after installation

Here are 4 tips about the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

2008 2009 2010 2011 2012-2013 Subaru Forester car radio installation guide

1. The original car radio.

The original car radio

2. Pry around the trim panel with a lever.

Pry around the trim panel with a lever

3. Remove the trim panel with your hands.

Remove the trim panel with your hands

4. Unscrew four screws holding the original radio in place with a screwdriver.

Unscrew four screws holding the original radio in place with a screwdriver

5. Gently take out the original radio.

Gently take out the original radio

6. Disconnect all connectors at the back of the original car radio.

Disconnect all connectors at the back of the original car radio

7. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo

8. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo

9. Connect the Seicane car stereo to your original car radio’s plugs.

10. Turn on the new Seicane stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane stereo into the dash.

12. Put everything into their original place.

Wish the above installation can be helpful for you. If you have any doubts, you can consult your dealer, communicate with someone experienced or turn to a professional for help. Anyway, before installation, please carefully select an ideal car radio. If you have no ideas, you can check out the following link which is a remarkable 2008 2009 2010 2011 2012-2013 Subaru Forester car radio from Seicane.

https://www.seicane.com/2008-2013-subaru-forester-android-gps-radio-dvd-player-navigation-system-touch-screen-bluetooth-obd2-dvr-tv-1080p-video-3g-wifi-ipod-usb-sd-rearview-camera-steering-wheel-control-s167068

This car radio is based on the pure and intelligent Android 7.1 operation system as well as a high-quality quad-core CPU processor, this car radio for a 2008 2009 2010 2011 2012-2013 Subaru Forester can be regarded as one of your good choices thanks to its high performance.

With the help of the built-in GPS navigation system, through text-to-speech guidance, you will be provided with the most suitable route option to reach your destinations accurately and safely. Moreover, under the wireless Bluetooth technology, you can pair your Bluetooth-enabled mobile phone with this car radio for Bluetooth hands-free calls and streaming music.

Wish you like this unit and good luck to you!