The installation for an aftermarket car dvd radio GPS head unit is always easy, because the special wiring harness is customized to fit the original factory plug. Therefore, you don’t need to modify wires to install the radio. Besides, since the radio is customized to fit the existing dashboard, it can be installed in the dash without gaps. A detailed installation guide for a 2002 2003 2004 Dodge Interpid radio is as follows. You can take it as your reference if you own a same car model.
2002 2003 2004 Dodge Interpid car radio after installation
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2002 2003 2004 Dodge Interpid car radio installation guide
1. Remove the trim piece above cup holder with a lever.
Remove the trim piece above cup holder with a lever
2. Remove 2 screws behind the trim piece.
Remove 2 screws behind the trim piece
3. Gently pry around the side of trim panel with the lever and then remove the trim panel.
Gently pry around the side of trim panel with the lever and then remove the trim panel
4. Remove 4 screws which holds the factory radio in place.
Remove 4 screws which holds the factory radio in place
5. Take out the factory radio.
Take out the factory radio
6. Disconnect the smaller harness on the behind of the factory radio.
Disconnect the smaller harness on the behind of the factory radio
7. Check all the accessories for the new Seicane car radio.
Check all the accessories for the new Seicane car radio
8. Connect the harnesses to the back of the new Seicane car radio.
Connect the harnesses to the back of the new Seicane car radio
9. Connect the Seicane car radio to your original car radio’s plugs.
10. Install four screws and trim panel.
11. Install 2 screws behind the trim piece and the trim piece.
12. Turn on the new radio and have a comprehensive test if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
It is very normal if you come across any difficulties during the installation for the first time. Under this circumstance, there are many things you can do to overcome difficulties. You can contact with your dealer for a wiring diagram, browse some professional related websites or seek help from a professional mechanic. If you want to buy a high cost-performance radio for a 2002 2003 2004 Dodge Interpid, you can consider purchasing such a multifunctional 2002 2003 2004 Dodge Interpid car radio from Seicane.
With exquisite design and comprehensive features, this 2002 2003 2004 Dodge Interpid car radio is intelligent enough to be a great replacement for your factory radio. Since this radio is plug-and-play, and the installation needs just simple steps, you don’t need to modify the wire or cut any wires. So what features does this 2002 2003 2004 Dodge Interpid car radio mainly come with? The main features supported are GPS navigation, Bluetooth hands-free calls, Bluetooth streaming music, high-speed 3G and WiFi internet, CD/DVD player, etc. Thanks to these features of the radio, they can meet almost all your various requirements so as to help you gain a wonderful in-car life. Don’t hesitate to add it to your cart right now. Good luck!
Recent Comments