Do you look forward to having a wonderful driving experience? If yes, as far as I am concerned, you can try to replace your factory radio with a brand new multifunctional car radio for your car. And you can also try to remove your original factory radio and install it under a related installation guide. Today I would like to share a 2007 2008 2009 2010 Jeep Wrangler Unlimited car radio installation instruction from Seicane with you. If you have the same or similar dashboard, please keep reading it carefully.
2007 2008 2009 2010 Jeep Wrangler Unlimited car radio after installation
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2007 2008 2009 2010 Jeep Wrangler Unlimited car radio installation instruction
1. The original car radio.
The original car radio
2. Remove the panel by prying the edges with a lever.
Remove the panel by prying the edges with a lever
3. Unscrew four screws holding the original radio in place with a screwdriver.
Unscrew four screws holding the original radio in place with a screwdriver
4. Take the original radio out of the dash.
Take the original radio out of the dash
5. Disconnect the connectors at the back of the original radio.
Disconnect the connectors at the back of the original radio
6. Check all the accessories for the new Seicane car stereo.
Check all the accessories for the new Seicane car stereo
7. Connect the harnesses to the back of the new Seicane car stereo.
Connect the harnesses to the back of the new Seicane car stereo
8. Connect the Seicane car stereo to your original car radio’s plugs.
9. Turn on the new Seicane stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
10. Put the new Seicane stereo into the dash.
11. Put everything into their original place.
Now do you have a general understanding of the above installation instruction? If you have any questions, you can seek help from your dealer, someone experienced or a professional. Or you can directly go to a car radio upgrade center and ask a professional technician to help you install the new car radio. Anyway, before installation, it is essential for you to pick an ideal car radio. If you have no ideas, here I’d like to share a remarkable 2007 2008 2009 2010 Jeep Wrangler Unlimited car radio from Seicane with you. For more details, please click:
This car radio is running on the most advanced and stable Android 8.0 operation system, a powerful eight-core CPU processor and 4GB RAM as well as 32GB Inland flash, which will greatly facilitate its operation.
Thanks to this unit’s 7 inch multi-touch screen with HD 1024*600 pixel resolution, you can enjoy the perfect visual effects when you enjoy movies or videos in your car.
Besides, under the guidance of the turn-by-turn directions and voice prompts, you can easily locate where you are and find the right way to arrive at your desired destinations. Additionally, this unit comes with dual zone function, so you can freely listen to your favorite music while navigating.
What’s more, under the wireless Bluetooth technology, you can pair your Bluetooth-enabled mobile phone with this unit so that you can freely get access to Bluetooth hands-free phone calls as well as Bluetooth streaming music without taking your hands off the steering wheel.
If you like this unit, just add it to your shopping cart!
Recent Comments