How to replace a 2007-2014 Toyota Land Cruiser 200 radio with 3G WiFi Bluetooth GPS Navigation system Capacitive Touch Screen

Driving your beloved car and enjoying your favorite music on the way to your desired destination is really cool, doesn’t it? Do you expect a more exciting driving experience? If you say yes, then just upgrade your factory radio with a modern car radio which is definitely to give you a brand new experience with its powerful compatibilities. To help you better install a new radio, I’ d like to share a step-by-step installation guide for you, which is about an excellent 2007-2014 Toyota Land Cruiser 200 radio from Seicane. If you have the same dashboard as the image below, you can also follow it for your car.

 

 

Some tips before the installation:

1. Please disconnect the power before the installation.
2. Please prepare a lever and a screwdriver before the removal and the installation.
3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

 

 

2007-2014 Toyota Land Cruiser 200 radio installation guide

1.Take out the two blots that distributed on both sides of handbrake.

 

2.Remove screws with your hand.

 

3.After the bolts are removed, take out the left and right loosed dashboard.

 

4.Disconnect the cable between them.

 

5.Get out the screw with your hands.

 

6.Remove five screws as the picture show.

 

7.Pull the original radio out of the dashboard.

 

8.Disconnect the connectors at the back of the original radio.

 

9.Connect the cables on the new Seicane radio as the user manual shows and place them well.

10.Put the new Seicane radio into the dash.

11.Turn on the new Seicane radio and have a comprehensive check if it works well.

12.Install 4 screws back to their original position.

13.Check whether the unit is working without problem.

14.If everything is OK, make trim panel back on your new Seicane radio.

Wish the instructions can be helpful for you, if you have any questions during the whole process, you can turn to your dealer or a professional for help. Please make clear about every step before the installation.

 

What’s more, please make sure you have a suitable radio for your car, so that it can work well with your car and be installed without any gap. If you haven’t found a fitting one, I’ d like to recommend an ideal 2007-2014 Toyota Land Cruiser 200 radio from Seicane to you, which is the latest radio for 2007-2014 Toyota Land Cruiser 200 at present. Here’s its link, please click:

 

http://www.seicane.com/9-inch-android-radio-for-2007-2014-toyota-land-cruiser-200-with-3g-wifi-bluetooth-gps-navigation-system-capacitive-touch-screen-built-in-dvd-tpms-dvr-obd-ii-rear-camera-aux-headrest-monitor-control-usb-sd-video-s082693

 

With a real-time 3D GPS navigation system built in this Toyota Land Cruiser 200 radio, you can easily reach your destination with the turn-by-turn direction and voice prompts. When you simply sync with your enabled mobile phone, you are able to make and receive hands-free calls and stream music from your favorite playlist to keep safe and cheerful on all the trips.

 

Just easily arrive at a all locations with pleasure and safety with this all-in-one Toyota Land Cruiser 200 radio in your car. Good luck to you!