A multifunctional head unit can bring a large great deal of convenience, for example, you can easily arrive your desired destination with the most accurate direction and voice prompts while you can enjoy your favorite music in your beloved car at the same time. It sounds exciting, doesn’t it? Here comes an amazing 2004 2005 2006 Ford Focus head unit from Seicane for you to replace your factory radio to great performance and high capabilities. And you can refer to the following step-by-step installation guide for its installation.
2004 2005 2006 Ford Focus head unit after installation
Here are some tips for you before the installation:
- Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.
- A lever and a screwdriver need to be prepared before the installation.
2004 2005 2006 Ford Focus head unit installation guide
Step 1: Remove the trim around gear shifter.
2004 2005 2006 Ford Focus head unit installation step 1
Step 2: Remove screws securing center console lid with a screwdriver.
2004 2005 2006 Ford Focus head unit installation step 2
Step 3: Remove the center console trim.
2004 2005 2006 Ford Focus head unit installation step 3
Step 4: Remove console side panels on both driver and passenger sides.
2004 2005 2006 Ford Focus head unit installation step 4
Step 5: Remove bolts securing radio bezel and AC controls.
2004 2005 2006 Ford Focus head unit installation step 5
Step 6: Unplug AC controls (from passenger side).
2004 2005 2006 Ford Focus head unit installation step 6
Step 7: Remove the radio bezel and AC controls.
2004 2005 2006 Ford Focus head unit installation step 7
Step 8: Remove screws securing radio to the vehicle.
2004 2005 2006 Ford Focus head unit installation step 8
Step 9: Take the original radio out of the dash.
Step 10:Make antennas and cables of the new Seicane head unit connected step by step as installation instructions show, and you should be very careful when you are doing this for it will affect the whole procedure.
Step 11: Put the new Seicane head unit into the dash.
Step 12: Turn on the new Seicane head unit and check whether the radio is working properly.
Step 13: Install all screws, trims, panels, bolts and the radio bezel and AC controls into their original place.
That’s all the installation guide for a Ford Focus head unit. If you find the dashboard is a bit different from yours, please rest assured, for the installation is similar. If you find it hard to install it on your own, you can go to a car stereo upgrade center or ask for a professional to have it installed.
In addition, you also need to confirm that your new unit can be compatible with your car. To check the compatibility, you can refer to the following Seicane Ford Focus head unit which can perfectly fit 2004 2005 2006 Ford Focus at present. Here’s the link:
This Ford Focus head unit comes with a large 7 inch multi-touch screen with HD 1024*600 pixel resolution, you can enjoy an easier operation and a visually radiant display when playing various kinds of videos. With the built-in GPS navigation system, you won’t get lost no matter you are travelling around the whole country or finding a closest gas station. To have hands-free calls for safety, you just need to simply sync your mobile phone with this unit, besides, you can also stream music from the playlist in your mobile phone.
Just go and take this amazing Ford Focus head unit on all trips to enjoy a brand new driving experience. Good luck to you!
Recent Comments