To get to your desired destination, a modern head unit can lead you with the most accurate guidance, voice prompts and much entertainment. And it’s not too difficult to install it in your car. If you are a car owner of a 2002 2003 2004 Dodge Intrepid , this step-bys-step Dodge Intrepid car stereo installation instruction from Seicane can be much helpful for you. To have a successful installation, you can take it as a reference.
2002 2003 2004 Dodge Intrepid car stereo after installation
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
2002 2003 2004 Dodge Intrepid car stereo installation guide
1.Loosen the trim panel with a lever.
1.Loosen the trim panel with a lever
2.Take the panel off the dash and disconnect the wires from the car.
2-1.Take the panel off the dash and disconnect the wires from the car.
3.Remove the four screws which are holding the unit with a screwdriver.
3.Remove the four screws which are holding the unit with a screwdriver.
4.Take out the unit and disconnect the wire harness at the back of the unit.
4-1.Take out the unit and disconnect the wire harness at the back of the unit.
4-2.Take out the unit and disconnect the wire harness at the back of the unit.
5.Connect the new wiring harness adaptor to the car, then, to the unit.
5-1.Connect the new wiring harness adaptor to the car, then, to the unit.
5-2.Connect the new wiring harness adaptor to the car, then, to the unit.
6.Connect the wire as the user manual shows and put the new unit into the dash.
6.Connect the wire as the user manual shows and put the new unit into the dash.
7.Turn on the new unit and have a test if the new Seicane stereo is working without problem..
8.Put trim panel back on your new Seicane stereo after the normal test.
That’s all the installation guide for a 2002 2003 2004 Dodge Intrepid car stereo. If you find your dashboard is different from that shown in the installation guide, please don’t worry, it won’t have much influence on the installation which is similar on the whole. In addition, if you don’t have an ideal stereo for your car, I’d like to introduce this intelligent 2002 2003 2004 Dodge Intrepid car stereo from Seicane to you, which is an ideal replacement for your car, please click for more details:
With the CPU upgraded to RK PX3 1.6 GHz Quad-core, this 2002-2004 Dodge Intrepid car stereo can greatly enhance the performance for all users. It is integrated with both a top GPS navigation system as well as a powerful DVD player, so that you can easily get to you destination with great enjoyment at the same time. To keep your journey safer and more enjoyable, you can pair with your enabled mobile phone via the bluetooth wireless connection for hands-free calls and streaming music.
Recent Comments