Upgrading your factory radio with a new aftermarket car stereo can not only improve the capabilities of your car but also take your driving experience to next level. Therefore, more and more car owners replace the factory radio to get a more comfortable environment. If you also have such a plan, then a detailed installation guide can be much helpful for you. The following is the step-by-step installation instruction from Seicane for a 2006 2007 Dodge Caliber (W Factory NAV) car stereo. If you also own a 2006 2007 Dodge Caliber (W Factory NAV), wish you can get help from it.
2006 2007 Dodge Caliber (W Factory NAV) car stereo after installation
Precautions for this installation:
1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2.Please make sure that all fastened wires are isolated with electrical tape.
3.Please make sure the ignition is off to avoid short circuit.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2006 2007 Dodge Caliber (W Factory NAV) car stereo installation guide
1.Loosen the trim panel with a lever.
1.Loosen the trim panel with a lever
2.Take the panel off the dash and disconnect the wires from the car.
2-1.Take the panel off the dash and disconnect the wires from the car.
2-2.Take the panel off the dash and disconnect the wires from the car.
3.Remove the four screws which are holding the original radio with a screwdriver.
3.Remove the four screws which are holding the unit with a screwdriver.
4.Take out the original radio and disconnect the wire harness at the back of the original radio.
4-1.Take out the unit and disconnect the wire harness at the back of the unit.
4-2.Take out the unit and disconnect the wire harness at the back of the unit.
5.Check all the accessories for the new Seicane stereo.
5.Check all the accessories for the new Seicane car radio.
6.Connect the Seicane stereo to your original car radio ‘s plugs.
6-1. Connect the Seicane car stereo to your original car radio ‘s plugs.
6-2. Connect the Seicane car stereo to your original car radio ‘s plugs.
7.Put the new Seicane stereo into the dash.
7.Put the new Seicane stereo into the dash.
8.Turn on the new radio and have a test if the new Seicane stereo is working without problem..
9.Put trim panel back on your new Seicane stereo after the normal test.
That’s all the installation guide for a 2006 2007 Dodge Caliber (W Factory NAV) car stereo. Wish it can be helpful for you. If you find the dashboard is different from that shown in the guide, please don’t worry, the installation is similar, it won’t have much influence on the whole. If there is any question, you can consult your dealer or ask a professional for help.
Do you find an ideal car stereo for your car? If not, I’d like to recommend a modern 2006 2007 Dodge Caliber (W Factory NAV) car stereo from Seicane to you. Here’s the link, please click:
This superior Dodge Caliber (W Factory NAV) car stereo comes with the built-in wifi and the availability of 3G dongle connection for you to get access to online data and thousands of apps in your car. You will have no trouble in finding the best way to your destination when taking this GPS navigation system with you. To make hands-free calls for safety, you just need to wirelessly connect with your enabled mobile phone via bluetooth connection. Streaming music from your phone and other portable devices can relax both you and your passengers on all trips.
Recent Comments