To install a new aftermarket car radio in your car, you can go to a car radio upgrade center to have it installed by a professional technician. And if you have some related installation experience, you can also try to finish the whole installation process by yourself. No matter which way you choose, you can search online for a correct guide to help you. Now I’d like to share a step-by-step 2002 2002 2003 2004 CHRYSLER Concorde Bluetooth Radio installation guide from Seicane with you. Wish you can get some help from it.
2002 2003 2004 CHRYSLER Concorde Bluetooth Radio after installation
Precautions for this installation:
1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2. Please make sure that all fastened wires are isolated with electrical tape.
3. Please make sure the ignition is off to avoid short circuit.
4. Please prepare a lever and a screwdriver before the removal and the installation.
5. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd- 400
2002 2003 2004 CHRYSLER Concorde radio installation steps
1. Remove the trim piece above cup holder with a lever.
Remove the trim piece above cup holder with a lever
2. Remove 2 screws behind the trim piece.
Remove 2 screws behind the trim piece
3. Gently pry around the side of trim panel with the lever and then remove the trim panel.
Gently pry around the side of trim panel with the lever and then remove the trim panel
4. Remove 4 screws which hold the factory radio in place.
Remove 4 screws which hold the factory radio in place
5. Take out the factory radio.
Take out the factory radio
6. Disconnect the smaller harness on the behind of the factory radio.
Disconnect the smaller harness on the behind of the factory radio
7. Check all the accessories for the new Seicane car radio.
Check all the accessories for the new Seicane car radio
8. Connect the harnesses to the back of the new Seicane car radio.
Connect the harnesses to the back of the new Seicane car radio
9. Connect the Seicane car radio to your original car radio’s plugs.
10. Install four screws and trim panel.
11. Install 2 screws behind the trim piece and the trim piece.
12. Turn on the new radio and have a comprehensive test if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
Now do you have a general understanding of 2002 2003 2004 CHRYSLER Concorde radio installation process? If not, you can browse some related websites, consult your dealer or ask a professional for help. Besides, it is very important for you to pick a suitable car radio for your car. If you don’t have any ideas, I’d like to share a 2002 2003 2004 CHRYSLER Concorde Bluetooth Radio from Seicane with you. For more details, please click:
With firmware and software upgraded, this one din 2002 2003 2004 CHRYSLER Concorde radio will be an ideal replacement for your factory radio. There are some main features being supported by this unit, which include GPS navigation system, radio tuner, DVD player, Bluetooth function, USB port, SD card slot, etc. Thus, when you are driving you can be offered both convenience and entertainment.
The high-precise 3D GPS navigation will provide you with the turn-by-turn direction and voice prompts to guide you to ideal destinations accurately even you are not good at identifying directions. The Bluetooth technology can support pairing your Bluetooth-enabled cell phone with this unit, so that you can have hands-free calls and stream music keeping your hands on the steering wheel control to have a safe and pleasant driving.
Wish you have a good time accompanied by this 2002 2003 2004 CHRYSLER Concorde radio!
Recent Comments