To take your car into next level, installing a new multifunctional head unit can easily make that come true. You can improve your car interior environment, and get a lot of convenience and enjoyment as well. To install a new unit is actually not too difficult. It just takes less than half an hour to finish the removal of your old radio and the installation of the new head unit. The following is a detailed installation guide about a Nissan Qashqai X-TRAIL head unit. Please look at the picture below, which is a modern 2014 2015 Nissan Qashqai X-TRAIL head unit from Seicane. If you also have the same dashboard, then you can read this article carefully to help with its installation.
2014 2015 Nissan Qashqai X-TRAIL head unit after installation
Precautions for the installation
Before connecting, please make sure the ignition is off to avoid short circuit.
Ensure connect the yellow and red power cable at last.
Ensure that all loose wires are isolated with electrical tape
Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
Ensure that all ground is connected to the same place.
Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
2014 2015 Nissan Qashqai X-TRAIL head unit installation guide
1·Remove the trim panel with pry tools.
1. Remove the trim panel with pry tools
2·Then remove the air condition console.
2. Then remove the air condition console
3·Unplug connectors behind the air condition console.
3. Unplug connectors behind the air condition console
4·Remove the trim panel.
4. Remove the trim panel
5·Remove the screws fixed on the factory radio, and pull out the factory radio from dashboard.
5. Remove the screws , and pull out the factory radio from dashboard
6·Disconnect the harnesses behind the factory radio.
6. Disconnect the harnesses behind the factory radio
7·Connect the original harness with new Seicane head unit cable adapter.
8·Lay the GPS antenna cable into a pillar.
9·Remove the holder kits from the original radio.
10·Fix the holder kits on new Seicane head unit with screws.
11·Connect the original harness with cable adapter cable, connect the GPS antenna and radio antenna adapter.
12·Fix new Seicane unit into the dash with screws, and put the trim panels back.
Wish the above can all be useful for you. You may encounter some questions during the whole process, then you can consult your dealer or a professional for help. Please make sure every step before the installation.
A suitable head unit plays a vital role in a successful upgrade. If you are still looking for one, I’ d like to recommend an ideal Nissan Qashqai X-TRAIL head unit for you, which is from Seicane and features a lot of functions for you to upgrade your factory radio, for more details, please click:
This Nissan Qashqai X-TRAIL head unit is equipped with an advanced R16 1.6 GHz Quad-core CPU which can let you enjoy a smoother performance than before. Arriving at anywhere without getting lost any more is not a problem when you go with this amazing GPS navigation system. To simply link with your compatible mobile phone, you are enabled to make and receive phone calls with your hands on the steering wheel control to keep safe and stream music for relaxation on all your trips.
Go on all trips with this excellent Nissan Qashqai X-TRAIL head unit in your car and enjoy all your driving experience from now on!
Recent Comments