If you would like to save some money on replacing your factory radio with a new aftermarket car radio, why not consider dealing with the installation all by yourself? With a correct related installation guide, you can also learn how to remove your factory radio and install the new car radio. The following is an amazing 2011 2012 2013 2014 Toyota Highlander car radio installation guide from Seicane, which can be taken as your reference.
2011 2012 2013 2014 Toyota Highlander Car Radio after installation
Here are some tips before the installation:
1. Please disconnect the power before the installation.
2. Please prepare a lever and a screwdriverbefore the removal and the installation.
3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4. For your convenience, here’s therecommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2011 2012 2013 2014 Toyota Highlander car radio installation instruction
1. The original car radio.
The original car radio
2. Use a plastic removal tool to remove the AC vent.
Use a plastic removal tool to remove the AC vent
3. Move the shifter lever so as to get access to the bottom A/C panel below the radio.
Move the shifter lever so as to get access to the bottom A/C panel below the radio
4. Remove the panel.
Remove the panel
5. Remove the AC unit.
Remove the AC unit
6. Gently take out the original car radio and disconnect the connectors at the back of the radio.
Gently take out the original car radio and disconnect the connectors at the back of the radio
7. Check all the accessories for the new Seicane car stereo.
8. Connect the harnesses to the back of the new Seicane car stereo.
9. Connect the Seicane car stereo to your original stereo’s plugs.
10. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
11. Put the new Seicane car stereo into the dash.
12. Put everything into their original place. All the installation is done.
Wish the above installation instruction can be helpful for you to some extent. If you meet any problems you cannot deal with independently, you can seek help from your dealer, someone experienced or a professional. If you are still looking for a suitable car radio, you can refer to the following link which is a remarkable 2011 2012 2013 2014 Toyota Highlander car radio from Seicane. For more details, please click:
This car radio is upgraded to the latest Android 7.1 operation system and a powerful quad-core 1.6GHz RK PX3 processor, so it can greatly facilitate your operation.
As long as you make full use of the high-precision 3D GPS navigation system, you are able to know your current locations and navigate to your desired destinations through turn-by-turn directions and voice prompts. Thanks to the dual zone function of this unit, you can freely listen to your favorite music while navigating. And the music will automatically switch to the GPS voice.
For a safer and happier driving, without taking your hands off the steering wheel, you can pair your Bluetooth-enabled mobile phone with this car radio so as to dial, receive or reject hands-free calls as well as Bluetooth streaming music.
Wish you like this unit and good luck to you!
Recent Comments