Since a car is not merely a means of transportation, more and more car owners are pursuing a comfortable in-car life and a relaxing driving experience. Actually, a car radio which is compatible with a wide range of features can help you a lot. If you are fed up with your mono-functional factory radio, it is necessary for you to replace it with a new one. To help with your installation, I’d like to share a detailed 2002-2011 Chevy Chevrolet AVEO gps dvd car radio installation guide from Seicane with you. If you have a same vehicle type, you can take it as a reference.
2002-2011 Chevy Chevrolet AVEO gps dvd car radio after installation
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2002-2011 Chevy Chevrolet AVEO car radio installation instruction
1.Pry the surrounded panel out of the dash with a plastic knife.
1-1.Pry the surrounded panel out of the dash with a plastic knife
1-2
2.Remove screws that fixed the radio on the dashboard with a screwdriver.
Remove screws that fixed the radio on the dashboard with a screwdriver
3.Gently pull the factory radio out of the dash.
Gently pull the factory radio out of the dash
4.Then unplug the connectors at the back of the factory radio.
Then unplug the connectors at the back of the factory radio
5. Check all the accessories for the new Seicane car radio.
Check all the accessories for the new Seicane car radio
6. Connect the harnesses to the back of the new Seicane car radio.
Connect the harnesses to the back of the new Seicane car radio
7. Connect the Seicane car radio to your original stereo’s plugs.
8. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
9. Put the new Seicane car radio into the dash.
10. Put everything into their original place. All the installation is done.
Are you able to install this 2002-2011 Chevy Chevrolet AVEO gps dvd car radio in your car under the guidance of the detailed installation instruction? If you think it too hard, you can consult your dealer or ask a professional for help. Besides, before the installation, it’s necessary for you to check if your new unit can be compatible with your car. If you don’t know, I’d like to recommend this amazing 2002-2011 Chevy Chevrolet AVEO gps dvd car radio from Seicane to you as a reference. For more details, please click:
Equipped with not only practical functions but also entertainment features, this marvelous car radio from Seicane for a 2002-2011 Chevy Chevrolet AVEO gps dvd car radio can be the best replacement for your factory radio at present. After the installation of this radio, the car’s steering wheel still remains its original functions. Without taking your hands off the steering wheel, you can get access to hands-free calls and streaming music by simply pairing your Bluetooth-enabled with this unit through Bluetooth technology. And it is easy for you to reach anywhere you’d like to go with the help of the built-in GPS. Wish you like it!
Recent Comments