With the improvement of science and technology, more and more things are becoming multifunctional. More features are available in just one device. The car radio is no exception. Now you can not only navigate to your desired destination with the most accurate direction but also have much fun on the way with a multifunctional radio in your car. If you are going to replace your factory radio with such a new one, you can read this step-by-step 2006-2012 Mercedes Benz Viano Vito W639 radio installation guide from Seicane, wish it can be helpful for you.
2006-2012 Mercedes Benz Viano Vito W639 radio after installation
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
2006-2012 Mercedes Benz Viano Vito W639 radio installation guide
2006-2012 Mercedes Benz Viano Vito W639 radio installation guide
1. Detach the outer frame of the original CD player.
1. Detach the outer frame of the original CD player
2. Use a screw driver to remove the screws marked with red circles.
2. Use a screw driver to remove the screws marked with red circles
3. Remove the screw on the lower right.
3. Remove the screw on the lower right
4. Remove the screw on the lower left.
4. Remove the screw on the lower left
5. Remove the screw on the upper left.
5. Remove the screw on the upper left
6. Remove the screw on the upper right.
6. Remove the screw on the upper right
7. Use a screw driver to remove the screws marked with red circles.
7. Use a screw driver to remove the screws marked with red circles
8. Remove the original CD player.
8. Remove the original CD player
9. Insert the plug of the car into the socket of unit.
9. Insert the plug of the car into the socket of unit
10. Remarks:
a. Plug in the radio antenna.
b. Plug in the GPS antenna.
10. Remarks a. Plug in the radio antenna. b. Plug in the GPS antenna
11. Install the new Seicane radio into the dashboard.
11. Install the new Seicane stereo into the dashboard
12. Fasten the new Seicane radio with 4 screws and install the frame back.
12. Fasten the new Seicane stereo with 4 screws and install the frame back
13. Turn on the new Seicane radio to have a comprehensive check.
Are you able to install your new radio on your own now? If you don’t think you can do it by yourself, please ask a professional for help. Please make clear every step before you start to install it. If there is any question, you can consult your dealer.
To have a successful upgrade, you need to have a fitting radio for your car. If you don’t have one, you can refer to this amazing 2006-2012 Mercedes Benz Viano Vito W639 radio from Seicane, it’s an ideal radio replacement with its multiple functionalities, please click for more details:
Built with a WINCE 6.0 CORE operation system, this popular Mercedes Benz Viano Vito W639 radio is great for you to upgrade your stock radio. With the lane assist, 3D street view, landmark display, route planning, turn-by-turn display, voice prompts provided by the latest GPS navigation system, you can travel around the whole country without getting lost anymore. To keep safe and cheerful, you just need to simply sync your compatible mobile phone with this unit to dial and receive phone calls with your hands on the steering wheel control and stream music.
To have an extraordinary driving experience, this Mercedes Benz Viano Vito W639 radio is just the best choice for you. Just take it right now and go!
Where can I get a user manual the radio/ CD player in my 2015 Mecedes Sprinter. Model no MF2830; CMII ID 2008DJ0613
“Dear,
so sorry for the inconvenience.
In order to give you a fast solution,we suggest you asked our after sales staff for help.
The email is aftersales@seicane.
Have a good day!”