8 steps to upgrade a 2011 2012 2013 Jeep Grand Cherokee car stereo with GPS DVD Bluetooth

Having an intelligent 2011 2012 2013 Jeep Grand Cherokee car stereo in your vehicle, you can not only go anywhere you’d like or find an ideal restaurant without getting lost anymore, but also be filled with a lot of enjoyment and pleasure all the way with the various kinds of entertainment options. If you want this amazing experience with you, it’s time you replace your factory radio with a top car stereo right now.

2011 2012 2013 Jeep Grand Cherokee car stereo after installation

To upgrade 2011 2012 2013 Jeep Grand Cherokee car stereo in your vehicle with success, the installation should arouse your great attention. Since incorrect installation would cause unexpected damage to both your new car stereo and your beloved car. In most cases, the installation of a car stereo is quite easy. The detailed instructions of replacing a 2011 2012 2013 Jeep Grand Cherokee car stereo is provided for you as follows to have a reference.

Preparations before the installation:

1. Please remove the negative cable from the vehicle battery for safety.
2. Please prepare a lever and a screwdriver for the installation.

The below is the step-by-step instructions about the installation of a 2011 2012 2013 Jeep Grand Cherokee car stereo:

1. Loosen the trim panel with a lever.
   

   2011 2012 2013 Jeep Grand Cherokee car stereo installation step 1

2. Take the panel off the dash and disconnect the wires from the car.
   

   2011 2012 2013 Jeep Grand Cherokee car stereo installation step 2-1

   

   2011 2012 2013 Jeep Grand Cherokee car stereo installation step 2-2

3. Remove the four screws which are holding the unit with a screwdriver.
   

   2011 2012 2013 Jeep Grand Cherokee car stereo installation step 3

4. Take out the unit and disconnect the wire harness at the back of the unit.
   

   2011 2012 2013 Jeep Grand Cherokee car stereo installation step 4-1

   

   2011 2012 2013 Jeep Grand Cherokee car stereo installation step 4-2

5. Connect the new wiring harness adaptor to the car, then, to the unit.
   

   2011 2012 2013 Jeep Grand Cherokee car stereo installation step 5-1

   

   2011 2012 2013 Jeep Grand Cherokee car stereo installation step 5-2

6. Connect the wire as the user manual shows and put the new Seicane unit into the dash.
   

   2011 2012 2013 Jeep Grand Cherokee car stereo installation step 6

7.Turn on the new Seicane unit and have a test.

8.Put trim panel back to its original place after the normal test.

May the above guide can be helpful for you to upgrade your factory radio. Before the installation, you should find a car stereo which can work well with your vehicle. To help you find an ideal replacement for your car, I’d like to share an amazing 2011 2012 2013 Jeep Grand Cherokee car stereo from Seicane with you:

http://www.seicane.com/seicane-s09263-aftermarket-android-4-4-car-stereo-navigation-for-2011-2012-2013-jeep-grand-cherokee-with-canbus-obd2-bluetooth-radio-gps-hd-1024-600-touch-screen-steering-wheel-control-dvr-rearview-camera-tv-video-usb-sd-wifi-quad-core-cpu-

This car stereo with Android 4.4.4 runs fastest among all the head units for 2011 2012 2013 Jeep Grand Cherokee at present.  The powerful Quad-core CPU also greatly smoothes the performance. Press the GPS button, the 3D street view, lane assist, route planning, millions of points of interest and voice prompts are provided for you to arrive at your destination. To simply sync your mobile phone with this unit, you can make and receive hands-free calls and streaming music to keep your journey safer and happier. Take this 2011 2012 2013 Jeep Grand Cherokee car stereo with you, a different driving with security and pleasure is always on all your trips!