First of all, please look at the following picture. It is a 2012 2013 2014 VW Volkswagen Magotan B7 Bora Golf 6 car radio after installation, which looks amazing, doesn’t it? Here I would like to introduce how to remove the factory radio and install the new car radio for 2012 2013 2014 VW Volkswagen Magotan B7 Bora Golf 6. If you own the same or similar dashboard and plan to replace a new aftermarket car radio, you can carefully refer to the following 2012 2013 2014 VW Volkswagen Magotan B7 Bora Golf 6 car radio installation steps.
2012 2013 2014 VW Volkswagen Magotan B7 Bora Golf 6 car radio after installation
Before and during installation, you should notice:
1. Before connecting, please make sure the ignition is off to avoid short circuit.
2. Ensure connect the yellow and red power cable at last.
3. Ensure that all loose wires are isolated with electrical tape
4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5. Ensure that all ground is connected to the same place.
6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2012 2013 2014 VW Volkswagen Magotan B7 Bora Golf 6 car radio installation steps
1. The original car radio.
The original car radio
2. Use a plastic pry tool to remove the radio frame.
Use a plastic pry tool to remove the radio frame
2-1
3. Use a screwdriver to remove four mounting screws of the radio.
Use a screwdriver to remove four mounting screws of the radio
4. Gently pull the original radio out from the dash.
Gently pull the original radio out from the dash
5. Disconnect the connectors and cables at the back of the radio.
6. Check all the accessories for the new Seicane car radio.
Check all the accessories for the new Seicane car radio
7. Connect the harnesses to the back of the new Seicane car radio.
Connect the harnesses to the back of the new Seicane car radio
8. Connect the Seicane car radio to your original car radio’s plugs, and put the new Seicane car radio into the dash, and fix all the screws.
9. Install the decoration panel and push it inside until the latches lock it.
10. Turn on the new Seicane car radio to conduct a comprehensive check if all functions work well.
If you meet any problems that you don’t know how to deal with, it is suggested that you should seek help from your dealer, someone experienced or a professional. If you still think it hard to install the new car radio by yourself, you can directly arrange a professional technician to help you install the new car radio. Anyway, before installation, it is very essential for you to carefully pick an ideal car radio. If you have no ideas, here I would like to share a marvelous 2012 2013 2014 VW Volkswagen Magotan B7 Bora Golf 6 car radio from Seicane with you. For more details, please click:
This car radio is running on the latest and the most stable Android 6.0 operation system and a powerful quad-core CPU processor to enhance its capabilities, performance and configuration. Besides, this car radio also comes with a lot of practical and entertainment features, which enables you to enjoy great convenience and enjoyment.
With the assistance of the worldwide real-time GPS navigation system, you are able to easily know where you are currently and find the right way to reach your desired destinations according to turn-by-turn directions and voice prompts. Additionally, this unit comes with dual zone function, so you can freely enjoy your favorite music while navigating.
What’s more, through the Bluetooth connection between your Bluetooth-enabled mobile phone and this unit, you can freely get access to Bluetooth hands-free phone calls as well as Bluetooth streaming music.
If you like this car radio, just don’t hesitate to add this unit to your shopping cart.
Recent Comments