Would you like to enjoy more features from an ideal car radio in your car? If your answer toward this question is “yes”, then you can consider replacing your factory radio with a new multifunctional car radio. If you own a 2011 2012 2013 2014-2015 KIA K2 and plan to install a new car radio to replace your factory radio, then you can take the following 2011 2012 2013 2014-2015 KIA K2 car radio installation guide from Seicane as a reference. Wish it is helpful for you to some extent.
2011 2012 2013 2014-2015 KIA K2 Car Radio after installation
Tips about the installation:
1. Please disconnect the power before the installation.
2. Please prepare a lever and a screwdriver before the removal and the installation.
3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2011 2012 2013 2014-2015 KIA K2 car radio installation guide
1. The original car radio.
The original car radio
2. Use a plastic removal tool to release the top panel.
Use a plastic removal tool to release the top panel
3. Pry the trim panel of the radio with a plastic knife and remove it.Unplug the connector at the back of it.
Pry the trim panel of the radio with a plastic knife and remove it.Unplug the connector at the back of it
3-1
4. Unscrew the screws that are holding the radio on the dashboard.
Unscrew the screws that are holding the radio on the dashboard
5. Take out the radio gently.
Take out the radio gently
6. Unplug the connectors and cables at the back of the radio.
Unplug the connectors and cables at the back of the radio
7. Check all the accessories for the new Seicane car radio.
Check all the accessories for the new Seicane car radio
8. Connect the harnesses to the back of the new Seicane car radio.
Connect the harnesses to the back of the new Seicane car radio
9. Connect the Seicane car radio to your original radio’s plugs.
10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
11. Put the new Seicane car radio into the dash.
12. Put everything into their original place. All the installation is done.
Now do you have a general understanding of a 2011 2012 2013 2014-2015 KIA K2 car radio installation process? If you have any questions, please don’t hesitate to seek help from your dealer, someone experienced or a professional. Besides, it is very essential for you to pick an ideal car radio for your car. If you have no ideas, here I would like to share an amazing 2011 2012 2013 2014-2015 KIA K2 car radio from Seicane with you. For more details, please click:
There is no doubt that you will gain a brand new in-car life since this unit is loaded with the advanced Android 6.1 operation system and quad-core CPU processor.
Under the guidance of the turn-by-turn directions and voice prompts provided by the high-end 3D GPS navigation system, you are able to easily locate where you are and have the most suitable route option to reach any locations you would like to go to. Besides, thanks to this unit’s dual zone function, this unit enables you to listen to your favorite music behind the scene under GPS mode and the music will automatically switch to GPS voice.
Besides, this unit also support Bluetooth function. As long as you pair your Bluetooth-enabled mobile phone with this multifunctional car radio, you are able to dial, receive, reject and mute Bluetooth hands-free phone calls as well as listen to Bluetooth streaming music from your phone playlists.
What are you waiting for? This unit is at a very competitive price now. If you like it, just add it to your shopping cart!
Recent Comments