Nowadays, it is commonly seen that more and more car owners would like to install a new car radio to replace their factory radio with modern features so as to create a more convenient and comfortable in-car environment as well as improve a better driving experience. If you plan to remove your factory radio and install a new aftermarket car radio on your own, you can refer to the following 2006 2007 2008 2009 2010-2012 Suzuki SX4 car radio installation guide.
2006 2007 2008 2009 2010-2012 Suzuki SX4 Bluetooth DVD Car Radio
Precautions for this installation:
1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2. Please make sure that all fastened wires are isolated with electrical tape.
3. Please make sure the ignition is off to avoid short circuit.
4. Please prepare a lever and a screwdriver before the removal and the installation.
5. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd- 400
2006 2007 2008 2009 2010-2012 Suzuki SX4 car radio installation guide
1. The original car radio.
The original car radio
2. Remove two side panels.
Remove two side panels
3. Remove four screws that are holding the radio.
Remove four screws that are holding the radio
4. Gently pull out the original radio.
Gently pull out the original radio
5. Disconnect the connectors and cables at the back of the radio.
6. Check all the accessories for the new Seicane car radio.
Check all the accessories for the new Seicane car radio
7. Connect the harnesses to the back of the new Seicane car radio.
Connect the harnesses to the back of the new Seicane car radio
8. Connect the Seicane car radio to your original radio’s plugs.
9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
10. Put the new Seicane car radio into the dash.
11. Put everything into their original place. All the installation is done.
That’s all about how to remove and install a 2006 2007 2008 2009 2010-2012 Suzuki SX4 car radio. If you have any doubts, please feel free to consult your dealer, communicate with someone experienced or turn to a professional for help. Or you can directly arrange a professional technician to help you install the new car radio.
To help you effectively select an ideal car radio, you might as well check out the following link which is a remarkable 2006 2007 2008 2009 2010-2012 Suzuki SX4 car radio from Seicane. Here comes the related link, please click:
This great car radio can facilitate your operation since it is loaded with the most advanced and stable Android 7.1 operation system and a high-quality quad-core CPU processor. With this car radio installed in your car, you can get access to a wide range of comprehensive features, mainly including 3D GPS navigation system, FM/AM radio tuner, DVD player, Bluetooth hands-free calls, Bluetooth streaming music, file management, etc.
Under the guidance of the turn-by-turn directions and voice prompts provided by the advanced 3D GPS navigation system of high accuracy, you can easily know your current locations and navigate to your desired destinations. And this unit’s dual zone function enables you to listen to your favorite music while navigating.
If you like this unit, just add it to your shopping cart. Good luck to you!
Recent Comments