There is no denying that most car drivers would like to create a comfortable and convenient car interior environment and enjoy an exciting driving experience. And the most effective way to achieve these goals is to replace your factory radio to a multifunctional car radio which comes with a wide range of practical and entertainment features to meet most of your needs in car. The following is a 2014 2015 KIA KX3 car radio installation guide. If you have the same or similar dashboard, you can refer to this installation guide carefully.
2014 2015 KIA KX3 Car Radio after installation
Before and during installation, you should notice:
1. Before connecting, please make sure the ignition is off to avoid short circuit.
2. Ensure connect the yellow and red power cable at last.
3. Ensure that all loose wires are isolated with electrical tape
4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5. Ensure that all ground is connected to the same place.
6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details:http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2014 2015 KIA KX3 car radio installation guide
1. The original car radio.
The original car radio
2. Use a plastic removal tool to pry the panel.
Use a plastic removal tool to pry the panel
2-1
2-2
3. Remove four screws that fixed the radio on the dashboard.
Remove four screws that fixed the radio on the dashboard
Remove four screws that fixed the radio on the dashboard
4. Gently remove the original radio.
5. Disconnect the connectors and cables at the back of the radio.
Disconnect the connectors and cables at the back of the radio
6. Check all the accessories for the new Seicane car radio.
7. Connect the harnesses to the back of the new Seicane car radio.
8. Connect the Seicane car radio to your original radio’s plugs.
9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
10. Put the new Seicane car radio into the dash.
11. Put everything into their original place. All the installation is done.
Wish you can get some inspiration from the above installation instruction. If you have any doubts, please feel free to consult your dealer, communicate with someone experienced or turn to a professional for help. Or you can directly arrange a professional technician to help you install the new car radio. Besides, if you are still searching for a suitable car radio for your beloved car, here I would like to introduce a remarkable 2014 2015 KIA KX3 car radio from Secaine to you. The following is the link, please click:
This all-in-one car radio is loaded with the most advanced Android 7.1 operation system, a high-quality quad-core RK PX3 processor, which will greatly facilitate its operation so as to provide you with a wonderful in-car experience.
With the assistance of the worldwide real-time GPS navigation system of high precision, you are able to know your current locations and find the right way to reach any locations you would like to go to according to turn-by-turn directions and voice prompts. Additionally, this unit’s dual zone function also allows you to freely enjoy beautiful music while navigating, and the music will automatically switch to GPS voice.
Besides, through wireless Bluetooth connection between your Bluetooth-enabled mobile phone and this car radio, you are able to dial, answer, reject or mute Bluetooth hands-free calls as well as listen to your favorite music without taking your hands off the steering wheel.
Just add this unit to your shopping cart and good luck to you!
Recent Comments