How to Succeed in 2008 2009 2010 2011 2012 KIA Forte(MT) Bluetooth GPS Car Radio Installation

As you can see, an ideal car radio in a car is not merely to improve the in-car environment but also to take the driving experience up a notch. With an ideal car radio installed in your car, you can enjoy great convenience and have endless fun in your car. Therefore, more and more car owners would like to upgrade their factory radios. This article is mainly about how to install a     2008 2009 2010 2011 2012 KIA Forte(MT) car radio. If you have the same or similar dashboard, and plan to upgrade your factory radio by yourself, you can carefully refer to this article to help with the installation.

2008 2009 2010 2011 2012 KIA Forte(MT) Bluetooth GPS Car Radio after installation

2008 2009 2010 2011 2012 KIA Forte(MT) Bluetooth GPS Car Radio after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2008 2009 2010 2011 2012 KIA Forte(MT) car radio installation guide

1. The original car radio.

The original car radio

The original car radio

2. Pry the left air conditioner vent with a lever, and then remove it.

Pry the left air conditioner vent with a lever, and then remove it

Pry the left air conditioner vent with a lever, and then remove it

3. Pry the right air conditioner vent with a lever, and then remove it.

Pry the right air conditioner vent with a lever, and then remove it

Pry the right air conditioner vent with a lever, and then remove it

4. Unscrew four screws under the a/c vent holding the original car radio with a screwdriver.

Unscrew four screws under the a/c vent holding the original car radio with a screwdriver

Unscrew four screws under the a/c vent holding the original car radio with a screwdriver

5. Gently take the original car radio out of the dash.

Gently take the original car radio out of the dash

Gently take the original car radio out of the dash

6. Disconnect all connectors at the back of the original car radio.

Disconnect all connectors at the back of the original car radio

Disconnect all connectors at the back of the original car radio

7. Check all the accessories for the new Seicane car radio.

8. Connect the harnesses to the back of the new Seicane car radio.

9. Connect the Seicane car radio to your original car radio ‘s plugs.

10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane car radio into the dash.

12. Put everything into their original place. All the installation is done.

 

Wish you can get some inspiration from the above installation guide. Don’t worry if you encounter any difficulties but don’t know how to overcome them. Under this circumstance, you can consult your dealer, communicate with someone experienced or turn to a professional for help. Or you can straightly go to a car radio upgrade center to arrange a technician to help you install the new car radio.

If you are still searching for an ideal car radio for your beloved car, here I would like to recommend a marvelous 2008 2009 2010 2011 2012 KIA Forte(MT) car radio from Seicane to you. For more details, please click:

https://www.seicane.com/hd-touchscreen-android-radio-gps-navi-for-2008-2012-kia-forte-mt-with-bluetooth-music-wifi-usb-1080p-video-mirror-link-s0491

With this car radio installed in your car, you are allowed to get access to a wide range of practical and entertainment features, which mainly include 3D GPS navigation system, FM/AM radio tuner, Bluetooth hands-free calls, Bluetooth streaming music, file management, AUX, steering wheel, etc.

When you turn on the high-end 3D GPS navigation system, you can get the accurate navigation information and the best route option to get to your desired destinations through turn-by-turn direction and voice prompts. Besides, with dual zone function, this unit allows you to listen to music that is played behind the scene under GPS mode while navigating.

Moreover, through the wireless Bluetooth connection between your Bluetooth-enabled mobile phone and this car radio, both Bluetooth hands-free calls and Bluetooth streaming music are both available for you to offer more convenience and enjoyment for you.

If you like this car radio, just add it to your shopping cart. Good luck to you!

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *