If you are looking forward to having a more relaxing in-car environment in your car, it is wise of you to replace your factory radio with a new aftermarket car radio which is integrated with numerous features to bring you a lot of convenience and enjoyment. Actually, it is not difficult to install a car radio. Here I would like to share a detailed 2003-2011 Audi A4 S4 RS4 car radio installation guide from Seicane with you. If you also have the same or similar dashboard, you can take this guide as a reference.
2003-2011 Audi A4 S4 RS4 Car Radio after installation
Some tips before the installation:
1. Please disconnect the power before the installation.
2. Please prepare a lever and a screwdriver before the removal and the installation.
3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2003-2011 Audi A4 S4 RS4 car radio installation steps
1. There are four removal slots in the radio.
There are four removal slots in the radio
2. Prepare four removal keys like what is shown in the picture below.
Prepare four removal keys like what is shown in the picture below
3. Insert the release keys into the holes of the radio. Please make sure that you put the key with the flat side facing the outside of the radio.
Insert the release keys into the holes of the radio. Please make sure that you put the key with the flat side facing the outside of the radio
4. Pull outwards to release the radio.
Pull outwards to release the radio
5. Disconnect the connectors and cables at the back of the radio.
6. Check all the accessories for the new Seicane car radio.
7. Connect the harnesses to the back of the new Seicane car radio.
8. Connect the Seicane car radio to your original radio’s plugs.
9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
10. Put the new Seicane car radio into the dash.
11. Put everything into their original place. All the installation is done.
Before installation, please make clear every detailed step. If you meet any difficulties and don’t know how to overcome them, you can contact your dealer, communicate with someone experienced or turn to a professional for help. Or for avoiding damage to your car radio or your car, you can directly arrange a professional technician to help you install the new car radio. If you have now idea that what kind of car radio can fit your car very well, you may check out the link below which is an amazing 2003-2011 Audi A4 S4 RS4 car radio from Seicane.
With this amazing car radio installed in your car, you will embrace a brand new driving experience since this car radio runs on the stable Android 6.0 operation system and a powerful 8 – Core 1.5 GHz RK-PX5 A53 processor to improve its capacities, configuration and performance.
The worldwide real-time GPS navigation system is specially built in this unit, which allows you to quickly locate where you are and accurately navigate to your destinations according to turn-by-turn directions and voice prompts. And you can listen to your favorite music while navigating.
Through the wireless Bluetooth connection between your Bluetooth-enabled mobile phone and this car radio, you are able to dial, answer, reject and mute hands-free calls as well as enjoy Bluetooth streaming music without taking your hands off the steering wheel, which largely guarantee your driving safety and convenience.
If you like this unit, just add it to your shopping cart. Good luck to you!
Recent Comments