Whether you want to catch up with the trend or take your driving experience up a notch, it is a wise choice for you to upgrade your mono-functional factory radio by installing a new aftermarket car stereo which comes with a lot of comprehensive features. And as for the installation, an installation guide can help you a lot. Here I would like to share a 2001-2011 TOYOTA HILUX car stereo installation guide with you. If you have the same or the similar dashboard, you can refer to this guide carefully.
2001-2011 TOYOTA HILUX Car Stereo after installation
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2001-2011 TOYOTA HILUX car stereo installation guide
1. Remove two trim panels at each side of the center console and set it aside.
Remove two trim panels at each side of the center console and set it aside
2. Remove the top panel and set it aside.
Remove the top panel and set it aside
3. Remove 4 screws holding the unit with a Phillips screwdriver.
Remove 4 screws holding the unit with a Phillips screwdriver
4. Gently take out the panel on the radio interface.
Gently take out the panel on the radio interface
5. Take out the radio and disconnect cables at back of it.
Take out the radio and disconnect cables at back of it
6. Check all the accessories for the new Seicane car stereo.
Check all the accessories for the new Seicane car stereo
7. Connect the harnesses to the back of the new Seicane car stereo.
Connect the harnesses to the back of the new Seicane car stereo
8. Connect the Seicane car stereo to your original car radio’s plugs.
9. Put the new Seicane car stereo into the dash.
10. Turn on the new Seicane car stereo and have a comprehensive check if it works well.
11. Install 4 screws back to their original position.
12. Install the trim panel back to its original place.
Wish the above installation guide can be helpful for you. If you have any questions, don’t hesitate to seek help from your dealer, someone experienced or a professional. Or you can browse some professional websites. But if you still think it hard to finish the whole installation process, you’d better directly go to a car stereo upgrade center to ask a technician to install the new car stereo.
Besides, if you are still looking for an ideal car stereo, here I would like to share a remarkable 2001-2011 TOYOTA HILUX car stereo from Seicane with you.
When referring to this unit’s comprehensive features, one of the highlights you cannot ignore is its high-accuracy 3D GPS function. With the assistance of turn-by-turn directions and voice prompts provided by 3D GPS function, you are able to know your current locations quickly and navigate to your desired destinations accurately. Besides, you can freely enjoy your favorite music from radio/AV/DVD/TV while you are navigating to your destinations.
While as for the entertainment options, you can take advantage of this unit’s DVD player function to play whatever you like to relax both yourself and your passengers, such as videos, TV programs, and movies, etc. So you will have a very relaxing driving.
What are you waiting for? Just add this car stereo to your shopping cart if you like it. Good luck to you.
Recent Comments