Are you looking forward to enjoying both practical and entertainment features in your beloved car? If you say “yes”, then it is high time for you to replace your factory radio with a brand new multifunctional car radio which comes with a lot of comprehensive features to meet your different needs. To install a new car radio in your car, you can find an installation instruction for reference. The following is a 2006-2012 Toyota Corolla car radio installation instruction from Seicane , wish it can be helpful for you.
2006-2012 Toyota Corolla Car Radio after installation
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2006-2012 Toyota Corolla car radio installation instruction
1. Remove the bottom panel (air conditioning) with plastic knife.
Remove the bottom panel (air conditioning) with plastic knife
1-1
2. Pry the top of the original car CD panel with plastic knife.
Pry the top of the original car CD panel with plastic knife
3. Remove the four screws with a screwdriver.
Remove the four screws with a screwdriver
4. Take the original radio out of the dash.
Take the original radio out of the dash
5. Pull the plug of the original radio.
Pull the plug of the original radio
6. Socket docking with the original radio directly, instead of cutting the original plug off.
Socket docking with the original radio directly, instead of cutting the original plug off
7. Put the original radio plug into our Seicane radio.
Put the original radio plug into our Seicane radio
8. Put the new Seicane radio back into the dash.
9. Turn on the new Seicane radio to check if all functions work well. If it doesn’t, please check whether all the cables are connected correctly.
10. Install four screws and panels into their original place.
Now do you know how to install a 2006-2012 Toyota Corolla car radio for your beloved car? If not, please don’t hesitate to contact your dealer for a wiring diagram or ask for a professional for help. And you can also directly arrange a technician to help you install the new car radio.
Anyway, first of all, it is very essential for you to pick an ideal car radio for your car. If you don’t have any ideas, you can check out the link below which is a remarkable 2006-2012 Toyota Corolla car radio from Seicane.
With this car radio installed in your car, you can get access to a wide range of practical and entertainment features, mainly including 3D GPS navigation, FM/AM radio tuner, Bluetooth hands-free calls, Bluetooth streaming music, CD DVD player, file management, steering wheel control, etc.
Thanks to the built-in 3D GPS navigation system of high accuracy, this unit allows you to quickly know your current locations and find the best way to reach your destinations through turn-by-turn directions and voice prompts.
By connecting your Bluetooth-enabled mobile phone to this multifunctional unit, you are able to make, answer, reject and mute hands-free calls as well as listen to your favorite music streaming from your phone playlists, which bring you a lot of convenience and enjoyment.
What are you waiting for? Just add this unit to your shopping cart if you like it. Good luck to you!
Recent Comments