What kind of measures will take if you want to create an excellent car interior environment and improve your driving experience? In my opinion, it will be a wise choice for you to replace your factory radio with a new aftermarket car stereo. To install a brand new car stereo, it is very necessary for you to find a detailed installation guide to help you. Today I would like to introduce an easy-to-understand installation guide on a 2006 2007 2008 2009 2010 Toyota Terios car stereo. If you exactly own the same or similar dashboard, it is suggested that you should read this guide carefully to help with your installation.
2006 2007 2008 2009 2010 Toyota Terios Dash Stereo after installation
Some tips before the installation:
1.Please disconnect the power before the installation.
2.Please prepare a lever and a screwdriver before the removal and the installation.
3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2006 2007 2008 2009 2010 Toyota Terios car stereo installation guide
1. Remove two trim panels at each side of the center console and set it aside.
Remove two trim panels at each side of the center console and set it aside
2. Remove the top panel and set it aside.
Remove the top panel and set it aside
3. Remove 4 screws holding the unit with a Phillips screwdriver.
Remove 4 screws holding the unit with a Phillips screwdriver
4. Gently take out the panel on the radio interface.
Gently take out the panel on the radio interface
5. Take out the radio and disconnect cables at back of it.
Take out the radio and disconnect cables at back of it
6. Check all the accessories for the new Seicane car stereo.
Check all the accessories for the new Seicane car stereo
7. Connect the harnesses to the back of the new Seicane car stereo.
Connect the harnesses to the back of the new Seicane car stereo
8. Connect the Seicane car stereo to your original car radio’s plugs.
9. Put the new Seicane car stereo into the dash.
10. Turn on the new Seicane car stereo and have a comprehensive check if it works well.
11. Install 4 screws back to their original position.
12. Install the trim panel back to its original place.
Wish the above installation guide can do some favor for your installation. If you meet any difficulties you cannot overcome independently, you can seek help from your dealer, someone experienced or a professional. Besides, before installation, please confirm that your car stereo can fit your car very well. If it is not compatible enough, you can check out the following link which is a remarkable 2006 2007 2008 2009 2010 Toyota Terios car stereo from Seicane.
This car stereo is running with the Android 6.0 operation system, 8 – core 1.5 GHz RK-PX5 A53 processor and 32 GB INand Flash as well as 2GB RAM.
With the assistance of the 3D GPS navigation, you can accurately locate where you are and navigate to your desired destinations through turn-by-turn directions and voice prompts. Additionally, with dual zone function, you can listen to music from radio/AV/DVD/TV etc so as to gain a lot of fun while navigating.
Under the wireless Bluetooth technology, you can pair your Bluetooth-enabled mobile phone with this all-in-one car stereo, so you can dial, receive, reject and mute hands-free calls as well as enjoy your favorite music from your mobile phone music playlists without taking your hands off the steering wheel. Thus, you can have a journey full of convenience and enjoyment.
Wish you like this unit and good luck to you!
Recent Comments