If you are offered a detailed guide of removing a factory radio and installing a new car stereo, would you like to try to upgrade your factory radio on your own? If you have some related installation experience, it is not difficult for you to finish the whole installation under the guidance of an installation guide on your own. And this will help you save a certain amount of money. If you happen to have a 2009 2010 2011 Jeep Compass, you can refer to the following 2009 2010 2011 Jeep Compass car stereo installation guide.
2009 2010 2011 Jeep Compass Touch Screen Radio Stereo after installation
Tips about the installation:
1. Please disconnect the power before the installation.
2. Please prepare a lever and a screwdriver before the removal and the installation.
3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2009 2010 2011 Jeep Compass car stereo installation guide
1. The original car radio.
The original car radio
2. Remove the panel by prying the edges with a lever.
Remove the panel by prying the edges with a lever
3. Unscrew four screws holding the original radio in place with a screwdriver.
Unscrew four screws holding the original radio in place with a screwdriver
4. Take the original radio out of the dash.
Take the original radio out of the dash
5. Disconnect the connectors at the back of the original radio.
Disconnect the connectors at the back of the original radio
6. Check all the accessories for the new Seicane car stereo.
Check all the accessories for the new Seicane car stereo
7. Connect the harnesses to the back of the new Seicane car stereo.
Connect the harnesses to the back of the new Seicane car stereo
8. Connect the Seicane car stereo to your original car radio’s plugs.
9. Turn on the new Seicane stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
10. Put the new Seicane stereo into the dash.
11. Put everything into their original place.
Wish the above installation guide can be helpful for you. Before installation, please make clear every detailed step. If you have anything you cannot understand, you can contact your dealer, communicate with someone experienced or turn to a professional for help.
To help you select an ideal car stereo for your beloved car, I’d like to share an excellent 2009 2010 2011 Jeep Compass Touch Screen Radio Stereo from Seicane with you. For more details, please click the following link:
This powerful car stereo is specially designed for 2009 2010 2011 Jeep Compass to upgrade your navigation, entertainment and driving experience.
Thanks to turn-by-turn directions and voice prompts provided by GPS navigation system, you are able to know your current locations and find the right way to arrive at your ideal destinations. Besides, because of dual zone function, you can freely enjoy your favorite music under GPS mode and the music will automatically switch to GPS voice.
Through the Bluetooth connection between your Bluetooth-enabled mobile phone and this unit, you can dial, receive, reject and mute hands-free calls as well as listen to streaming music.
As for entertainment options, various audio and video formats are compatible with this unit, so you can play whatever you like to enrich your in-car entertainment experience.
Wish you enjoy your trip. Good luck to you!
Recent Comments