Taking a multifunctional car stereo on all trips can not only guide you to any locations accurately but also entertain both yourself and your passengers all the way. You don’t have to worry that it is too complicated to install a new aftermarket radio since nowadays most car radios are plug and play, so the installation is not too complicated. The following is a detailed 2005-2011 TOYOTA Vitz Echo car radio installation guide from Seicane for your reference. If you are also an owner of a 2005-2011 TOYOTA Vitz Echo, then this article is worth your careful reading.
2005-2011 TOYOTA Vitz Echo Aftermarket Car Radio after installation
Tips about the installation:
1.Please disconnect the power before the installation.
2.Please prepare a lever and a screwdriver before the removal and the installation.
3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2005-2011 TOYOTA Vitz Echo car radio installation guide
1. Remove two trim panels at each side of the center console and set it aside.
Remove two trim panels at each side of the center console and set it aside
2. Remove the top panel and set it aside.
Remove the top panel and set it aside
3. Remove 4 screws holding the unit with a Phillips screwdriver.
Remove 4 screws holding the unit with a Phillips screwdriver
4. Gently take out the panel on the radio interface.
Gently take out the panel on the radio interface
5. Take out the radio and disconnect cables at back of it.
Take out the radio and disconnect cables at back of it
6. Check all the accessories for the new Seicane car radio.
Check all the accessories for the new Seicane car radio
7. Connect the harnesses to the back of the new Seicane car radio.
Connect the harnesses to the back of the new Seicane car radio
8. Connect the Seicane car radio to your original car radio’s plugs.
9. Put the new Seicane car radio into the dash.
10. Turn on the new Seicane car radio and have a comprehensive check if it works well.
11. Install 4 screws back to their original position.
12. Install the trim panel back to its original place.
Before or during the installation, if you have any doubts, you can not only consult your dealer, someone experienced but also ask for ask for a professional for help. Anyway, first of all, you have to check if your new car radio can fit your car well. If not, you’d better quit it and select a suitable one. Here I would like to recommend a 2005-2011 TOYOTA Vitz Echo Aftermarket Car Radio from Seicane to you.
This all-in-one car radio can be compatible enough for you to upgrade your factory radio in a 2005-2011 TOYOTA Vitz Echo. Loaded with the stable Android5.1.1 operation system and a high-quality RK3188 1.6 GHz Cortex A9 Quad-core processor, this unit enables you to have a smoother and faster operation experience than ever before.
With this unit in your car, you will have a large amount of entertainment options to play, including CDs, DVDs, music, TV programs, etc. So you can make your long driving be filled with joy and comfort.
With the help of GPS navigation system, you can easily locate where you are and navigate to your desired destinations with accurate guidance and voice prompts. The Bluetooth enables you to simply connect your Bluetooth-enabled mobile phone with this unit, thus hands-free calls and streaming music are both available for you.
Just remember to add this 2005-2011 TOYOTA Vitz Echo car radio to your shopping cart!
Recent Comments