Believe it or not, it takes you only several steps to install a new car stereo in your car, which is quite easy for you to do it all by yourself. If you own a 2011 2012 2013 2014 Mercedes Benz Smart and plan to upgrade your factory radio by installing an all-in one stereo, don’t hesitate to read this article. This article is mainly about how to remove and install a 2011 2012 2013 2014 Mercedes Benz Smart car stereo, which can help with your installation to some extent.
2011 2012 2013 2014 Mercedes Benz Smart Car Stereo after installation
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2011 2012 2013 2014 Mercedes Benz Smart car stereo installation instruction
1. The original car radio.
The original car radio
2. Use a lever to remove the panel marked in the picture.
Use a lever to remove the panel marked in the picture
3. Remove the screws marked with a red arrow.
Remove the screws marked with a red arrow
4. Use a lever to remove the decoration panel.
Use a lever to remove the decoration panel
5. Remove the two screws marked in the picture.
Remove the two screws marked in the picture
6. Pay attention to the buckles marked with red arrows. Push the unit down a little as the green arrow shows and pull out the unit.
Pay attention to the buckles marked with red arrows. Push the unit down a little as the green arrow shows and pull out the unit
7. Disconnect the connectors and cables at the back of the stereo.
8. Check all the accessories for the new Seicane car stereo.
Check all the accessories for the new Seicane car stereo
9. Connect the harnesses to the back of the new Seicane car stereo.
10. Connect the Seicane car stereo to your original stereo’s plugs.
11. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
12. Put the new Seicane car stereo into the dash.
13. Put everything into their original place. All the installation is done.
Wish you can get some skills from the above installation instruction. Before and during the installation, if you have any questions, you can seek help from your dealer or someone experienced. Or you can straightly arrange a professional to help you install the stereo for avoiding mistakes. Besides, to help you better select a suitable stereo for your car, I’d like to share a great 2011 2012 2013 2014 Mercedes Benz Smart gps Bluetooth car radio from Seicane with you. For more details, please click:
This Seicane 2011 2012 2013 2014 Mercedes Benz Smart car stereo is very intelligent as it is loaded with the Android 5.0.1 operation system and a powerful RK3188 1.6 GHz Cortex A9 Quad-core processor, which can offer you a smoother and faster operation experience than ever. Coming with a 7 inch HD 1024*600 multi-touch screen, this stereo enables you to enjoy the best display effect when you are playing a movie, music video or TV programs, etc. And you can also have a perfect view of the road ahead. What’s more, with it installed in your car, you can also get access to GPS navigation system, multimedia player, Bluetooth technology and other modern features. Wish you like it and good luck to you!
Recent Comments