How to Remove a 2005 2006 2007 Jeep Grand Cherokee Radio

Jeep Grand Cherokee radio

Replace the radio of your Jeep Grand Cherokee and install a new unit in it would be a pleasant thing. The new unit will bring more functions than the old one to you. You may read GPS map, watch videos, surf on Internet and so on in the new unit. If you make up your mind to upgrade your Jeep Grand Cherokee radio, please find a good head unit for your car and install the new unit professionally. Some new units will come with installation instructions. You can refer to the instruction and do the upgrade. But, if you don’t know much about car stereo upgrade, you’d better go to a car stereo upgrade center to do the upgrade.

Here are upgrade steps for a Jeep Grand Cherokee radio for your reference. Please remove the negative cable on the vehicle battery before the upgrade to ensure security.

1. Remove the trim panel. Use a lever to pry the trim panel which is cover the radio. Insert the lever into the gap between the panel and the dashboard and pry for several times until you can loosen the trim panel with your hands. Then, take it of the dashboard.    
2. Remove the radio. Unscrew the screws which are on the radio with a screwdriver. Put the screws away and take the radio out of the dash gently. There are wires at the back of the radio. Disconnect them and place the radio aside.   
3. Install the new unit. Connect the new unit to the original wiring harness. Some units should be connected to the original wiring harness by a wiring adapter. If your new unit should be connected like that, connect the adapter to the original wiring harness, then, to the new unit. Slide the new unit into the dash and connect the negative cable on the battery. Then, turn on the unit and test the functions in it. You should pay more attention to GPS navigation system, TV, radio and so on. Wrong wires connections will bring problems to the unit. So, make sure you connect the wires correctly.                                                                                                            
4. Install the trim panel. If everything’s good, fix the new unit with the screws you removed from the original unit before. And, insert the trim panel to its original place hard but don’t damage it.

Now, you have upgraded your Jeep Grand Cherokee radio. Wish the upgrade step can help. If you meet any problems during upgrade, please contact the technicians from the dealer or professional car stereo upgrade staffs.

Wish you enjoy the time with your new unit. And, if you haven’t found a new unit for your car, I would like to recommend a good and cheap one to you. It has many great functions. Check it out: http://www.seicane.com/aftermarket-radio-gps-dvd-player-for-2002-2007-jeep-grand-cherokee-liberty-patriot-wrangler-with-bluetooth-music-tv-ipod-iphone-usb-sd-mp3-aux-rearview-camera-t6015

This head unit fits 2005 2006 2007 Jeep Grand Cherokee(W/Factory NAV). It has built-in GPS navigation system for maps with voice cues, distance information, POIs, road planning and so on.

Its DVD player supports 1080p HD videos and DVD±R, DVD±RW, CD-R/RW, VCD, HDVD, DVCD and DIVX format.

It has Video/Audio/Aux input and output ports. You can connect to amplifier, headrest LCD monitor, rearview camera and other external media devices.

There are several OSD languages in this unit, such as, English, Russia, French, Hindi, Hebrew, Spain, Turkish, Thai, Portugal, Arabic etc.

It also supports Bluetooth hand free, USB and SD card video/music/photo, IPod music, analog TV and digital TV as options. It can do more than you want. Know more and get it now: http://www.seicane.com/aftermarket-radio-gps-dvd-player-for-2002-2007-jeep-grand-cherokee-liberty-patriot-wrangler-with-bluetooth-music-tv-ipod-iphone-usb-sd-mp3-aux-rearview-camera-t6015