As you can see, the picture below is a 2001-2010 Hyundai MATRIX android radio audio system from Seicane after installation. It looks so fantastic, doesn’t it? If you own a 2001-2010 Hyundai MATRIX and are considering replacing your factory radio with a new multifunctional car radio, you can refer to the following detailed installation guide which is about the car radio for this vehicle type.
Seicane 2001-2010 Hyundai MATRIX android radio audio system after installation
Some tips before the installation:
1.Please disconnect the power before the installation.
2.Please prepare a lever and a screwdriver before the removal and the installation.
3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2001-2010 Hyundai MATRIX car radio installation guide
1. Pry around the edges of the trim panel with removal tools.
Pry around the edges of the trim panel with removal tools
2. Take the trim panel out of the dash.
Take the trim panel out of the dash
3. Disconnect all the connectors at the back of the panel.
Disconnect all the connectors at the back of the panel
4. Unscrew all the screws holding the original car radio in place with a screwdriver.
Unscrew all the screws holding the original car radio in place with a screwdriver
5. Gently take the original car radio out of the dash.
6. Disconnect all connectors at the back of the original car radio.
7. Check all the accessories for the new Seicane car radio.
Check all the accessories for the new Seicane car radio
8. Connect the harnesses to the back of the new Seicane car radio.
Connect the harnesses to the back of the new Seicane car radio
9. Connect the Seicane car radio to your original car radio ‘s plugs.
10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
11. Put the new Seicane car radio into the dash.
12. Put everything into their original place. All the installation is done.
Don’t worry if you find your dashboard differs to the dashboard shown in the guide since car dashboard varies from year to year and the installation steps are similar. If you still think it hard to install such a car radio on your own, you’d better consult your dealer or have it installed by a professional.
In order to finish the whole installation process successfully, you have to make sure that your new radio fits your car very well. If you are unsure about this, you can check the following link which is about a 2001-2010 Hyundai MATRIX car radio from Seicane. Please click:
With this intelligent Hyundai MATRIX car radio in your car, you are able to go wherever you like with the help of the built-in 3D GPS navigation system in high accuracy. You can also utilize the Bluetooth to synchronizes your mobile phone with this radio for hands-free calls and streaming music, which brings you both safety and pleasure. Just enjoy your life with this multifunctional Hyundai MATRIX car radio. Good luck to you!
Hello please am interested in your product and please how much is the product the vents and the system
“Dear,
This is Seicane.com.
Thanks for interested in our product.
Could you please send us the photo of your car’s dashboard to sales@seicane.com?
And could you please tell us the model and year of your car?
Then we can help you check if this unit can fit your car or not ,hope you could cooperate with us.
Looking forward to hearing from you soon.
Thank you & Best regards!
“