Firsts shows you an excellent 2005-2012 BMW 3 Series E90 E91 E92 E93 head unit from Seicane after installation. If you want to add features to your car, it’s an ideal choice for you. And I’d like to share a detailed 2005-2012 BMW 3 Series E90 E91 E92 E93 head unit installation instruction to you. Wish it can be helpful for you.
2005-2012 BMW 3 Series E90 E91 E92 E93 head unit after installation
Precautions for this installation:
1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2.Please make sure that all fastened wires are isolated with electrical tape.
3.Please make sure the ignition is off to avoid short circuit.
4.Please prepare a lever and a screwdriver before the removal and the installation.
5.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2005-2012 BMW 3 Series E90 E91 E92 E93 head unit installation guide
1. The original dashboard before installation.
The original dashboard before installation
2. Pry the panel off with a lever. You need to lift the air-conditioning assembly and don’t pry the air-conditioning panel off directly.
Pry the panel off with a lever. You need to lift the air-conditioning assembly and don’t pry the air-conditioning panel off directly
3.Unplug the air-conditioning assembly. Then unscrew the CD player and pull the CD player out.
3-1.Unplug the air-conditioning assembly. Then unscrew the CD player and pull the CD player out.
3-2.Unplug the air-conditioning assembly. Then unscrew the CD player and pull the CD player out.
4. Disconnect the power plug behind the CD player and the plug of the radio aerials.
4-1. Disconnect the power plug behind the CD player and the plug of the radio aerials.
4-2. Disconnect the power plug behind the CD player and the plug of the radio aerials.
5. Take off the plastic bracket frame behind the CD Player. Six screws are shown in the picture as follow. 4 of them are T20 screws, 2 of them are turnbuckles(no.8).
Take off the plastic bracket frame behind the CD Player. Six screws are shown in the picture as follow. 4 of them are T20 screws, 2 of them are turnbuckles(no.8)
6. Unscrew the 2 turnbuckles(no.8).After the removal, the bracket is not needed, because the DVD comes with its metal bracket panel.
Unscrew the 2 turnbuckles(no.8).After the removal, the bracket is not needed, because the DVD comes with its metal bracket panel
7. Check all the accessories for the new Seicane head unit.
8. Connect the harnesses to the back of the new Seicane head unit.
9. Connect the Seicane head unit to your original head unit ‘s plugs.
10. Turn on the new Seicane head unit to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
11. Put the new Seicane head unit into the dash.
12. Put everything into their original place.
Can you understand all the installation steps for a 2005-2012 BMW 3 Series E90 E91 E92 E93 head unit? If not, it’s suggested you consult your dealer. Or you can also directly have a professional install it. If you haven’t found an ideal head unit for your car, you can refer to this modern 2005-2012 BMW 3 Series E90 E91 E92 E93 head unit from Seicane. It comes with the latest features and capabilities for you to upgrade your factory radio. For more details, you can click:
With this great 2005-2012 BMW 3 Series E90 E91 E92 E93 head unit in your car, you can search for different frequencies to listen to your favorite station with 18 FM and 12 AM channels to be preset. With a lot of multimedia choices to be supported, you can have much fun and pleasure in your car. The precise GPS navigation system can provide route planning, landmark display, turn-by-turn direction and voice prompts for you to find your way to your desired destination. Just take it and go right now!
Recent Comments