To go to your desired destination, you can easily count on an accurate GPS navigation system for the best route. If your factory radio can’t support a GPS navigation system, you can simply replace it with a new aftermarket car radio which can be compatible with many advanced features. The following is the step-by-step 2008-2013 SUBARU Forester Impreza car radio installation instruction from Seicane for your reference to install this new unit in your car.
2008-2013 SUBARU Forester Impreza car radio after installation
Precautions for this installation:
1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2.Please make sure that all fastened wires are isolated with electrical tape.
3.Please make sure the ignition is off to avoid short circuit.
4.Please prepare a lever and a screwdriver before the removal and the installation.
5.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2008-2013 SUBARU Forester Impreza car radio installation guide
1.The original car radio.
The original car radio
2.Pry around the trim panel with a lever.
Pry around the trim panel with a lever
3.Remove the trim panel with your hands.
Remove the trim panel with your hands
4.Unscrew four screws holding the original radio in place with a screwdriver.
Unscrew four screws holding the original radio in place with a screwdriver
5.Gently take out the original radio.
Gently take out the original radio
6.Disconnect all connectors at the back of the original car radio.
Disconnect all connetors at the back of the original car radio
7.Check all the accessories for the new Seicane car radio.
8.Connect the harnesses to the back of the new Seicane car radio.
9.Connect the Seicane car radio to your original car radio ‘s plugs.
10.Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
11.Put the new Seicane radio into the dash.
12.Put everything into their original place.
Are you able to understand all the installation steps for a 2008-2013 SUBARU Forester Impreza car radio? If not, it’s suggested you consult your dealer. Or you can also directly have a professional install it. If you haven’t found an ideal head unit for your car, you can refer to this amazing 2008-2013 SUBARU Forester Impreza car radio from Seicane. It comes with the latest features and capabilities for you to upgrade your factory radio. For more details, you can click:
This in dash Android 5.1.1 Radio GPS Navigation System is specially built for 2008-2013 SUBARU Forester Impreza. The built-in GPS providing a turn-by-turn direction keeps you a safer driving all the way and the bluetooth technology enables you to wirelessly stream audio and accept hands-free calls from compatible phones. What’s more, the back-up camera input of this unit lets you connect a camera to aid in parking. Just take this amazing 2008-2013 SUBARU Forester Impreza car radio on all trips and have great fun!
Recent Comments