Here I’d like to show a modern 2004-2012 Mercedes Benz B Class W245 car stereo from Seicane after installation. To enjoy more convenience and enjoyment in your car while you are driving, it’s wise of you to upgrade your factory radio with such a new head unit. And you don’t have to worry about its installation which is quite easy in fact. A correct installation guide can be much helpful. If you also have the same dashboard as the picture below, you can take this Mercedes Benz B Class W245 car stereo installation instruction for reference.
2004-2012 Mercedes Benz B Class W245 car stereo after installation
Precautions for this installation:
1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2.Please make sure that all fastened wires are isolated with electrical tape.
3.Please make sure the ignition is off to avoid short circuit.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2004-2012 Mercedes Benz B Class W245 car stereo installation guide
1.Detach the outer frame of the original car radio.
Detach the outer frame of the original car radio
2. Use a screw driver to remove the screws marked with red circles.
Use a screw driver to remove the screws marked with red circles
3. Remove the screw on the lower right.
Remove the screw on the lower right
4. Remove the screw on the lower left.
Remove the screw on the lower left
5. Remove the screw on the upper left.
Remove the screw on the upper left
6. Remove the screw on the upper right.
Remove the screw on the upper right
7. Use a screw driver to remove the screws marked with red circles.
Use a screw driver to remove the screws marked with red circles
8. Remove the original car radio
Remove the original car radio
9. Check all the accessories for the new Seicane car stereo.
Check all the accessories for the new Seicane car radio
10. Connect the harnesses to the back of the new Seicane car stereo.
Connect the harnesses to the back of the new Seicane car radio
11. Insert the plug of the car into the socket of unit.
Insert the plug of the car into the socket of unit
12.Remarks
a. Plug in the radio antenna.
b. Plug in the GPS antenna.
Remarks a. Plug in the radio antenna. b. Plug in the GPS antenna
13. Install the new Seicane car stereo into the dashboard.
Install the new Seicane radio into the dashboard
14. Fasten the new Seicane car stereo with 4 screws and install the frame back.
Fasten the new Seicane radio with 4 screws and install the frame back
15. Turn on the new Seicane car stereo to have a comprehensive check. If everything works well, all the installation is done. If not, please check if all the cables are connected correctly.
Can you install the new 2004-2012 Mercedes Benz B Class W245 car stereo in your car under the guidance of this step-by-step installation instruction? If not, you can go to a car stereo upgrade center to install it. Besides, you need to confirm that your new stereo can fit your car. If you don’t find one, you are recommended to take this great 2004-2012 Mercedes Benz B Class W245 car stereo into consideration. Here’s the link, please click for more details:
With this intelligent 2004-2012 Mercedes Benz B Class W245 car stereo in yoru car, its built in GPS navigation system provides the latest traffic information for you to find the way to a variety of locations. To wirelessly link with your enabled mobile phone, the bluetooth technology enables you to make and receive phone calls with your hands on the steering wheel for safety and stream music to relax on all trips. Your steering wheel control can still work after installation.
Why not take it right now and have a wonderful time from now on?
Recent Comments