To find the best way to your desired destination with ease, you can simply rely on an accurate real-time GPS navigation system which can offer all the information you need on the way. However, some of the factory radios don’t come with GPS function, or the original GPS can’t meet all your needs. In that case, you can easily replace your factory radio with a new aftermarket car stereo which can support a lot of features. To install a new stereo, you can seek help from a step-by-step installation guide. The following is a 2003 2004 2005 2006 Jeep Wrangler car stereo installation instruction from Seicanen, wish it can be helpful for you.
2003 2004 2005 2006 Jeep Wrangler car stereo after installation
Precautions:
- Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.
- A lever and a screwdriver need to be prepared before the installation.
- For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2003 2004 2005 2006 Jeep Wrangler car stereo installation guide
1.Loosen the trim panel with a lever.
1.Loosen the trim panel with a lever
2.Take the panel off the dash and disconnect the wires from the car.
2-1.Take the panel off the dash and disconnect the wires from the car.
2-2.Take the panel off the dash and disconnect the wires from the car.
3.Remove the four screws which are holding the original radio with a screwdriver.
3.Remove the four screws which are holding the unit with a screwdriver.
4.Take out the original radio and disconnect the wire harness at the back of the original radio.
4-1.Take out the unit and disconnect the wire harness at the back of the unit.
4-2.Take out the unit and disconnect the wire harness at the back of the unit.
5.Check all the accessories for the new Seicane unit.
5.Check all the accessories for the new Seicane car radio.
6.Connect the Seicane stereo to your original car radio ‘s plugs.
6-1. Connect the Seicane car stereo to your original car radio ‘s plugs.
6-2. Connect the Seicane car stereo to your original car radio ‘s plugs.
6-3. Connect the Seicane car stereo to your original car radio ‘s plugs.
7.Put the new Seicane stereo into the dash.
7.Put the new Seicane stereo into the dash.
8.Turn on the new radio and have a test if the new Seicane stereo is working without problem..
9.Put trim panel back on your new Seicane stereo after the normal test.
Wish the above installation guide about a 2003 2004 2005 2006 Jeep Wrangler car stereo can be helpful for you. If you have any question, please seek help from your dealer. If you don’t have any experience on the installation of a new stereo, you can have a professional install it.
In addition, it’s necessary for you to make sure your new stereo can be compatible with your car. If you don’t have a suitable stereo for your car, I’ d like to recommend an intelligent 2003 2004 2005 2006 Jeep Wrangler car stereo from Seicane to you. Here’s the link, please click:
This modern Jeep Wrangler car stereo comes with a number of stunning features to meet your needs in a modern car stereo, which include precise GPS navigation system, bluetooth hands-free calls, bluetooth audio, DVD and CD player, FM/AM radio, wifi, USB and SD card connection, etc. Other options like digital TV and rearview camera are also customized for you to get more convenience in your vehicle. Just take it and go right now!
Recent Comments