To keep your passengers entertained all the way, it’ s easy for you to upgrade your factory radios with a multifunctional car stereo which can provide multiple choices for you to relax in your car. For the installation, you don’t have to worry, because it’s not too difficult to install a new stereo in your car. Now I’ d like to introduce a detailed 2002 2003 2004 2005 2006 Chrysler Sebring car stereo installation guide from Seicane to you. If you also have the same dashboard as that shown in the below, you can refer to it for the installation of your new stereo.
2002 2003 2004 2005 2006 Chrysler Sebring car stereo after installation
Precautions:
- Please apply the parking brake and remove the negative cable on the vehicle battery before the removal to ensure safety.
- A lever and a screwdriver need to be prepared before the installation.
- For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2002 2003 2004 2005 2006 Chrysler Sebring car stereo installation guide
1.Remove the trim piece above cup holder with a lever.
1.Remove the trim piece above cup holder with a lever.
2.Remove 2 screws behind the trim piece.
2.Remove 2 screws behind the trim piece.
3.Gently pry around the side of trim panel with the lever and then remove the trim panel.
3.Gently pry around the side of trim panel with the lever and then remove the trim panel.
4.Remove 4 screws which holds the factory radio in place.
4.Remove 4 screws which holds the factory radio in place.
5.Take out the factory radio.
5.Take out the factory radio.
6.Disconnect the smaller harness on the behind of the factory radio.
6.Disconnect the smaller harness on the behind of the factory radio.
6-2. Check all the accessories for the new Seicane car radio.
7.Connect the Seicane stereo to your original car radio ‘s plugs.
7. Connect the Seicane car radio to your original car radio ‘s plugs.
8.Connect the smaller harness at the back of the new Seicane stereo.
9.Put the new Seicane stereo back into the dash.
10.Install four screws and trim panel.
11.Install 2 screws behind the trim piece and the trim piece.
12.Turn on the new radio and have a comprehensive test.
13.Tidy up everything in your car, and all the installation is done.
That’ s all the installation guide for a 2002 2003 2004 2005 2006 Chrysler Sebring car stereo. If you don’ t understand any of the steps, please don’t hesitate to turn to your dealer for help. If it’s the first time for you to upgrade your factory radio, then you’d better ask a professional to help you.
In addition, it’ s necessary for you to confirm that you have a suitable stereo for your car. If you have no idea about it, you can refer to this intelligent Chrysler Sebring car stereo from Seicane. For more details, please check:
This top Chrysler Sebring car stereo is integrated with a powerful DVD player, you can easily make both you and your passengers feel relaxed on all trips when you play DVDs, CDs, VCDs, Ipod, TV, etc. during your driving. You can also listen to your favorite radio station with 18 FM channels and 12 AM channels preset. The 3D GPS navigation system and bluetooth technology are both desirable to offer you the greatest convenience in your car.
Just refresh your driving experience with this up-to-date Chrysler Sebring car stereo for 2002 2003 2004 2005 2006 particularly. Good luck to you!
Recent Comments