To upgrade your factory radio, this article can be much helpful for you. If you are a car owner of a Fiat Viggio, then you can take the following as a reference, which is about the installation instruction of a new Fiat Viggio head unit. Please look at the image below about a… head unit after installation from Seicane, if you have the same dashboard, then you can read carefully this passage for the installation.
Fiat Viggio head unit after installation
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
Fiat Viggio head unit installation guide
1·Remove the original console panel with a lever, pry gently along the gap and pick up the panel. Then set it aside.
1. Remove the original console panel with a plastic knife
2·Remove the four screws that fixed the radio on the dashboard. Removing these screws will not be a difficult job.
2. Remove the four screws that fixed the radio on the dashboard
3·Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.
3. Pull the factory radio out of the dash
4·Unplug the connectors.
4. Unplug the connectors
5·Remove the brackets on both sides of the factory radio. So far the removal of the factory radio is completed. Next steps will move on to the installation of the Seicane unit.
5. Remove the brackets on both sides of the factory radio
6·Install the brackets on both sides of the Seicane unit.
7·Dock the connectors of the original vehicle and the upgraded car audio.
7. Dock the connectors of the original vehicle and the upgraded car unit
8·Insert the wires to the appropriate location of the upgraded head unit. If you are not sure about how to wire correctly, you may refer to the wiring diagram for details.
9·Fix the Seicane unit with the four screws.
9. Fix the Seicane unit with the four screws
10·Firm the console panel. Finally the new Seicane unit is installed and a comprehensive test should be conducted on the new unit.
10. Firm the console panel
Now can you install the new head unit on your own after reading this installation guide. If you find it too hard for you to finish the installation on your own, then you an ask a professional for help. If you don’t have an ideal unit for your car, then I’d like to recommend a modern Fiat Viggio head unit from Seicane to you, please click:
This intelligent Fiat Viggio head unit comes with a large 9 inch digital HD 1024*600 touch screen for the easy operation to ease your eyes. You won’t have any difficulty in finding your way to any unfamiliar with the most accurate GPS navigation system which can support a lifetime traffic information update. The bluetooth feature is specially built for the hands-free calls and streaming music to keep safer and more enjoyable during your whole driving.
Just install this all-in-one Fiat Viggio head unit in your car to enjoy the most convenience and enjoyment!
Recent Comments