Some car owners may worry that installing a new radio is too bothering, so that they’d rather continue to put up with the malfunction. In fact, it’s not too difficult to install a new car radio. It’ s just to remove the old factory radio and to install a new one. The steps are quite simple. Now I’d like to introduce a step-by-step Mercedes-Benz B200 radio before 2011 installation guide to you as a reference. Please look at the image below, it’s a Mercedes-Benz B200 radio before 2011 after installation. If you also have the same dashboard, then this instruction can be much helpful for you.
Mercedes-Benz B200 radio before 2011 after installation
Precautions for this installation:
1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2.Please make sure that all fastened wires are isolated with electrical tape.
3.Please make sure the ignition is off to avoid short circuit.
Mercedes-Benz B200 radio before 2011 installation guide
- Detach the outer frame of the original CD player.
1. Detach the outer frame of the original CD player
- Use a screw driver to remove the screws marked with red circles.
2. Use a screw driver to remove the screws marked with red circles
- Remove the screw on the lower right.
3. Remove the screw on the lower right
- Remove the screw on the lower left.
4. Remove the screw on the lower left
- Remove the screw on the upper left.
5. Remove the screw on the upper left
- Remove the screw on the upper right.
6. Remove the screw on the upper right
- Use a screw driver to remove the screws marked with red circles.
7. Use a screw driver to remove the screws marked with red circles
- Remove the original CD player.
8. Remove the original CD player
- Insert the plug of the car into the socket of unit.
9. Insert the plug of the car into the socket of unit
10. Remarks
a. Plug in the radio antenna.
b. Plug in the GPS antenna.
-
10. Remarks a. Plug in the radio antenna. b. Plug in the GPS antenna
11.Install the new Seicane radio into the dashboard.
-
11. Install the new Seicane radio into the dashboard
12. Fasten the new Seicane radio with 4 screws and install the frame back.
-
12. Fasten the new Seicane radio with 4 screws and install the frame back
13. Turn on the new Seicane radio to have a comprehensive check.
In a word, that’s all the installation guide for a Mercedes-Benz B200 radio before 2011.Wish it can be helpful for you. If you have any questions, please don’t hesitate to ask your dealer or a professional for help. If you find it too hard to understand all the steps, it’ s strongly suggested you have it install by a professional.
To make sure you have a successful upgrade, it’s necessary for you to have a suitable radio. If you don’t have one, then you are welcome to click this amazing Mercedes-Benz B200 radio before 2011 from Seicane:
This Mercedes-Benz B200 radio can support a lot of audio and video formats, therefore, you can play DVDs, CDs, VCD, iPod, FM/AM radio, Bluetooth music, etc. to amuse your passengers on all trips. The latest GPS navigation system can provide turn-by-turn direction and voice prompts for you to get to your destination on time. A journey with safety and pleasure can be easily accessible when you simply link your mobile phone with this unit via the Bluetooth technology.
Wish you a wonderful time on all trips with this remarkable Mercedes-Benz B200 radio in your car. Good luck to you!
Recent Comments