How to upgrade a 2006-2013 VW Volkswagen EOS car stereo with Quad-core CPU 16G Flash GPS navigation Bluetooth

As cars are becoming more and more easily available for people, car owners usually want to pursue a more comfortable life in their cars. A multifunctional car stereo can bring a lot of convenience and enjoyment in a car and thus is becoming more and more popular with car owners. Please look at the image below which a modern 2006-2013 VW Volkswagen EOS car stereo from Seicane, you can take the following VW Volkswagen EOS car stereo installation guide as a reference if you are going to upgrade your factory radio.

 

 

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

 

 

2006-2013 VW Volkswagen EOS car stereo installation guide

Step1: Remove the trim panel.

Please pry around the trim panel with a lever. While prying, please loosen the trim panel with your hand. When the trim panel is loosened, please remove the trim panel off the dashboard and gently place it aside for further removal.

 

Step2: Remove the four screws on the radio.

Please unscrew the four screws which are holding the radio at four corners with a screwdriver. Then keep them well in a small box for the installation of a new radio.

 

Step3: Take the factory radio out of the dash.

After the four screws are unscrewed, you can easily pull the factory radio out of the dash.

 

Step4: Disconnect the wiring harness.

Before you put the factory radio aside, please disconnect the wiring harness at the back of it.

 

Step 5: Connect the new Seicane car stereo to the original wiring harness as the user manual or the wiring diagram shows.

 

Step 6: Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

 

Step 7: Put the new Seicane car stereo into the dash and install four screws.

 

Step 8: Install the trim panel into its original place.

 

Wish the above installation guide can be helpful for you. If you are going to install this 2006-2013 VW Volkswagen EOS car stereo on your own, please make sure you are clear about every step before you start it. If you have any questions, you can ask your dealer or a professional for help.

 

In addition, you need to pick a right stereo for your car so that you can successfully upgrade your factory radio and make the new stereo work well. If you have no idea how to pick a suitable stereo for your car, you can refer to the following link which is about an amazing 2006-2013 VW Volkswagen EOS car stereo from Seicane, please click:

 

http://www.seicane.com/seicane-s128405-8-inch-android-4-4-4-dvd-radio-car-navigation-head-unit-for-2008-2013-vw-volkswagen-scirocco-with-3g-wifi-mirror-link-obd2-bluetooth-quad-core-cpu-16g-flash

 

This all-in-one car stereo is compatible with 2006 2007 2008 2009 2010 2011 2012 2013 VW Volkswagen EOS in particular. With upgraded both software and firmware, you can have the best driving experience with the most accurate guidance and the smooth operation. Supported a large amount of multimedia formats like DVD/DIVX/MP4/MP3/MP2/VCD etc., you can keep yourself and your passengers relaxed all the way.

 

To have a different and brand new driving experience, this VW Volkswagen EOS car stereo is your best choice. Just take it right now and start a new journey. Good luck to you!