Nowadays, with the improvement of people’s economic position, a lot of people are capable of affording a car. And What they need most is to embrace a wonderful driving experience. To achieve that goal, most car owners would like to upgrade their factory radio with a modern head unit. Here come 10 steps on installing a 2002-2010 Chevy Chevrolet OPTRA GPS navigation DVD player. If you also want to replace the head unit for a same vehicle on your own, please read it carefully.
2002-2010 Chevy Chevrolet OPTRA GPS navigation DVD player after installation
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2002-2010 Chevy Chevrolet OPTRA car radio installation instruction
1.Pry the surrounded panel out of the dash with a plastic knife.
1-1.Pry the surrounded panel out of the dash with a plastic knife
1-2
2.Remove screws that fixed the radio on the dashboard with a screwdriver.
Remove screws that fixed the radio on the dashboard with a screwdriver
3.Gently pull the factory radio out of the dash.
Gently pull the factory radio out of the dash
4.Then unplug the connectors at the back of the factory radio.
Then unplug the connectors at the back of the factory radio
5. Check all the accessories for the new Seicane car radio.
Check all the accessories for the new Seicane car radio
6. Connect the harnesses to the back of the new Seicane car radio.
Connect the harnesses to the back of the new Seicane car radio
7. Connect the Seicane car radio to your original radio’s plugs.
8. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
9. Put the new Seicane car radio into the dash.
10. Put everything into their original place. All the installation is done.
Please make sure you are clear about every step before the installation. Don’t worry if there is a little difference between your dashboard with the dashboard shown above, it won’t have much influence on the installation. If there is any question, don’t hesitate to consult your dealer or a professional. If you want to purchase a powerful head unit, I’d like to recommend a 2002-2010 Chevy Chevrolet OPTRA GPS navigation DVD player with GPS DVD player from Seicane to you. Please check the link for more details:
This 2002-2010 Chevy Chevrolet OPTRA GPS navigation DVD player comes with a wide range of features for you to upgrade your car radio so as to satisfy your different needs, including GPS navigation, DVD player, FM/AM radio, Bluetooth connectivity, USB and SD card connection, WIFI, 3G internet, etc.
As it is upgraded to the latest Android 5.1.1 operation system and a RK3188 1.6 GHz Cortex A9 Quad-core processor, you are going to enjoy its great utility and super high performance. Wish you like it and good luck to you!
Recent Comments