Have got a car radio but don’t know how to install it? Don’t be too worried. Since most car radios are plug-and-play units, the installation steps are not complicated and you don’t have to modify or cut any wires in car. With this post there is a step-by-step 2002-2007 Dodge Caravan Charger car radio installation guide. If you are a car owner of a 2002 2003 2004 2005 2006 2007 Dodge Caravan Charger, you can follow the guide gradually to install your new car radio on your own.
2002-2007 Dodge Caravan Charger Radio after installation
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2002-2007 Dodge Caravan Charger car radio installation guide
1. Loosen the trim panel with a lever.
Loosen the trim panel with a lever
2. Take the panel off the dash and disconnect the wires from the car.
Take the panel off the dash and disconnect the wires from the car
2-1
3. Remove the four screws which are holding the unit with a screwdriver.
Remove the four screws which are holding the unit with a screwdriver
4. Take out the unit and disconnect the wire harness at the back of the unit.
Take out the unit and disconnect the wire harness at the back of the unit
5. Check all the accessories for the new Seicane car radio.
Check all the accessories for the new Seicane car radio
6. Connect the harnesses to the back of the new Seicane car radio.
Connect the harnesses to the back of the new Seicane car radio
7. Connect the Seicane car radio to your original car radio’s plugs.
Connect the Seicane car radio to your original car radio’s plugs
8. Put the new Seicane car radio into the dash.
9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
10. Put trim panel back on your new Seicane car radio after the normal test.
Wish the above installation guide can help with your 2002-2007 Dodge Caravan Charger radio installation. If there is any question, please don’t hesitate to consult your dealer or seek help from a professional. Or you can also browse some professional websites. For a successful installation, a suitable car radio makes sense. Here I’d like to share a 2002 2003 2004 2005 2006 2007 Dodge Caravan Charger gps dvd radio from seicane with you. You may click:
This radio enables you to have an easier, smoother and faster operation experience as it is loaded with the stable Android 4.4.4 operation system, a RK PX3 1.66GMHZ frequency quad-core processor with improved performance and an 8 GB INAND Flash.
Thanks to the Android-based system of great utility and maximum scalability, according to your preference, you can search a lot of apps in the Android market and download them, such as Skype, Youtube, Twitter, Facebook, etc.
As for its function as a multimedia player, it is compatible with various audio and video formats, which include DVD/DIVX/MP4/MP3/MP2/VCD etc. With anti-shock and the last position storage feature of this unit, you can watch a movie or video in motion.
Just install this multifunctional radio in your 2002-2007 Dodge Caravan Charger and wish you enjoy your driving accompanied by this unit.
Recent Comments