If you are planning to upgrade your 2002-2007 Jeep Liberty, you can consider install a modern and multi-functional car stereo. A multi-functional car stereo not only has all features as the factory radio but also many other features like GPS navigation, Bluetooth, USB/SD connection, etc. Here I would like to introduce how to remove the factory radio and install a new aftermarket one in a 2002 2003 2004 2005 2006 2007 Jeep Liberty. You can refer to it and follow it step by step during the installation.
2002-2007 Jeep Liberty car stereo after installation
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2002-2007 Jeep Liberty car stereo installation instruction
1. Remove the trim piece above cup holder with a lever.
Remove the trim piece above cup holder with a lever
2. Remove 2 screws behind the trim piece.
Remove 2 screws behind the trim piece
3. Gently pry around the side of trim panel with the lever and then remove the trim panel.
Gently pry around the side of trim panel with the lever and then remove the trim panel
4. Remove 4 screws which hold the factory radio in place.
Remove 4 screws which hold the factory radio in place
5. Take out the factory radio.
Take out the factory radio
6. Disconnect the smaller harness on the behind of the factory radio.
Disconnect the smaller harness on the behind of the factory radio
7. Check all the accessories for the new Seicane car stereo.
Check all the accessories for the new Seicane car stereo
8. Connect the harnesses to the back of the new Seicane car stereo.
Connect the harnesses to the back of the new Seicane car stereo
9. Connect the Seicane car stereo to your original car radio’s plugs.
10. Install four screws and trim panel.
11. Install 2 screws behind the trim piece and the trim piece.
12. Turn on the new stereo and have a comprehensive test if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
Above is the whole installation process of a 2002 2003 2004 2005 2006 2007 Jeep Liberty car stereo. If there are any questions, you can contact with your dealer or a professional for seeking help. Besides, it is very crucial for you to select an ideal car stereo which is compatible with your beloved car. Here I would like to share a link with you for your reference which is a 2002 2003 2004 2005 2006 2007 Jeep Liberty gps bluetooth car stereo from Seicane.
Based on the stable Android 4.4.4 operation system, a strong RK PX3 1.6 GHz Quad-core CPU and 8 GB INAND Flash, this remarkable car stereo can be combined with 2002 2003 2004 2005 2006 2007 Jeep Liberty. This car stereo is with special wiring harness, so you can easily install this plug-and-play unit without modifying or cutting any wires in your car.
With the help of the Bluetooth technology, you can simply link your Bluetooth-enabled mobile phone with this unit so as to allow you to make and accept hands-free calls with your hands on the steering wheel as well as stream music from your playlists in your cell phone to relax on the way. Wish you like it!
Recent Comments