You don’t have to get irritated when you find that your factory radio cannot be compatible with some modern features. The most effective measure you can take is to replace the factory radio with an advanced stereo which can bring you convenience in car and add a lot of fun to your driving. This passage mainly introduces how to replace a 2013 2014 2015 Dodge Ram 1500 2500 3500 4500 stereo. If you have the same dashboard as the image shown below, you can take it as a reference and follow it step by step.
2013 2014 2015 Dodge Ram 1500 2500 3500 4500 stereo after installation
Precautions for this installation:
1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2.Please make sure that all fastened wires are isolated with electrical tape.
3.Please make sure the ignition is off to avoid short circuit.
4.Please prepare a lever and a screwdriver before the removal and the installation.
5.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd- 400
2013 2014 2015 Dodge Ram 1500 2500 3500 4500 stereo installation steps
1. Begin your installation by removing the negative cable from the vehicle’s battery.
Begin your installation by removing the negative cable from the vehicle’s battery
1-1
1-2
2. Remove the two upper dashboard trim panel retaining screws.
Remove the two upper dashboard trim panel retaining screws
2-1
3. Gently pry the outer edges of the radio trim panel to remove it from the dashboard.
Gently pry the outer edges of the radio trim panel to remove it from the dashboard
3-1
4. Disconnect the air conditioning control switch wire harnesses and lift the radio trim panel away from the dashboard.
Disconnect the air conditioning control switch wire harnesses and lift the radio trim panel away from the dashboard
5. Remove the four screws that secure the vehicle’s radio to the dashboard.
Remove the four screws that secure the vehicle’s radio to the dashboard
6. Gently lift the radio away from the dashboard and disconnect the factory wire harness from the back of the radio.
Gently lift the radio away from the dashboard and disconnect the factory wire harness from the back of the radio
7. Check all the accessories for the new Seicane car stereo.
Check all the accessories for the new Seicane car stereo
8. Connect the harnesses to the back of the new Seicane car stereo.
Connect the harnesses to the back of the new Seicane car stereo
9. Connect the Seicane car stereo to your original car radio’s plugs.
10. Turn on the new Seicane stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
11. Put the new Seicane stereo into the dash.
12. Put everything into their original place. All the installation is done.
Before or during the installation, if you come across any difficulties, you can ask your dealer or a professional for help. Besides, if you don’t know how to pick an ideal stereo for your 2013 2014 2015 Dodge Ram 1500 2500 3500 4500, here I would like to share a link with you which is about an amazing 2013 2014 2015 Dodge Ram 1500 2500 3500 4500 Stereo Radio Sound System from Seicane.
This 2013 2014 2015 Dodge Ram 1500 2500 3500 4500 stereo comes with a digital 7 inch HD 1024*600 touch screen, so you can enjoy its sensitive operation as well as its perfect visual effects. With the help of the GPS navigation system, you can be led to any unfamiliar destinations you’d like to go to through turn-by-turn navigation directions and voice direction. And under the wireless Bluetooth connection, it is possible for you to freely have hands-free calls and enjoy streaming music from your enabled mobile phone. The additional entertainment features are also supported to add a ton of fun to your trip. Wish you like it and have a nice day!
Recent Comments