When you are tired of your factory radio since it cannot refresh you and your passenger due to its simple functions, it is high time for you to replace your old factory radio with a brand new one armed with a number of advanced features. Today I would like to share a simple installation guide from Seicane for a 2011-2014 Hyundai I55 Android Radio car stereo. If you have a same or similar dashboard, you can follow the steps to install a new car stereo in your car.
2011-2014 Hyundai I55 Android Radio car stereo after installation
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2011-2014 Hyundai I55 car stereo installation steps
1.Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.
Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside
2.Remove screws that fixed the radio on the dashboard.
Remove screws that fixed the radio on the dashboard
3.Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.
Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio
4.Unplug the connectors at the back of the factory radio.
Unplug the connectors at the back of the factory radio
5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.
Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure
6.Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.
7.If everything is OK, firm screws into their original place.
If everything is OK, firm screws into their original place
8.Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.
Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio
Wish the above installation steps can help with your installation to some extent. If you don’t know how to solve the problems you encounter during your installation, please don’t hesitate to seek valuable advice from your dealer or ask a professional for help. Besides, if you are still searching online for a suitable car stereo at a reasonable price, I’d like to recommend a marvelous 2011-2014 Hyundai I55 Android Radio car stereo with gps navigation system from Seicane to you. For more details, please click:
Armed with the most advanced Android 5.1.1 operation system as well as 1.6 GHz Cortex A9 quad-core processor, this unit permits users to embrace a smoother and faster operation experience and enjoy its super high performance. With a large 8 inch HD 1024*600 multi-touch smart screen, this unit provides users with the best viewing effect not only about the road condition but also on entertainment features. Moreover, some other features like 3D GPS, Bluetooth module, DVD player, etc are all supported to offer you the best services. Wish you like it!
Recent Comments